Bedding -- Recommended Videos?

[Vandelayindustries]

I’m looking to bed a couple stocks and a few chassis. Never done any before. There’s a ton of videos on YouTube. Looking for a recommendation on a video that shows the correct way and is pretty detailed. Thanks!

 

[Savagenut71]

Richard Franklin, stress free bedding video

 

[GT Accuracy]

I see you’re in New York. If you want take a trip south, I can give you a little class on bedding

 

[long40shot]

The Richard Franklin video and article is excellent.

 

[Vandelayindustries]

I see you’re in New York. If you want take a trip south, I can give you a little class on bedding

That’s very kind of you. How far south are we talking?

 

[wasskeet]

Here is another good video series by Robert Gradous. It is a four-part series. Here's a link to part one:

 

[GT Accuracy]

That’s very kind of you. How far south are we talking?

I am in Bradford county, PA - 40 min south of Binghamton just across the border. Zip 18853

 

[big5ifty]

Before you work on more expensive stocks / chassis, it'll be well worth your while to buy an old wooden stock or two for one of your barrelled actions and practice a bit.

 

[K22]

Recognizing the criticality of bedding for precision shooting is wise. It took me awhile to recognize this fact wasting time, components and barrel life trying make a rifle shoot to my standards. Once I discovered the importance of bedding it made my shooting life so much more pleasant and economical.

Doing it yourself is commendable but I chose to use my local smith do to it who is an expert. I can't remember the exact price he charged but it was somewhere under $100. It's an alternative you may want to explore if you have a local smith, you trust or a local shooter who has experience who can guide you through the process.

 

[47WillysGuy]

In everything, a learning experience. Sometimes you save, sometimes you don’t.

 

[LVLAaron]

There are some good threads here as well.

 

[Edd]

Here is another good video series by Robert Gradous. It is a four-part series. Here's a link to part one:

Have you watched all four parts?

 

[wasskeet]

Have you watched all four parts?

I did years ago - I can't seem to find past part 2 now.

 

[big5ifty]

... if you have a local smith..

The above is sound advice.

Learning how to do it yourself is an achievement, you can then say you know what to do and how to do it.

That will not make you an expert. You can do it right a few times and still get it wrong the next.

If it's important that it's done right, have it done by someone that specialises in the job.

 

[Vandelayindustries]

The problem is I don’t have any gunsmiths close by that I’m aware of. I hate the idea of mailing it out too. That’d make to too nervous it’d get lost or stolen.

 

[Coyotefurharvester]

See if Gun Works, Verona NY (150 miles) would work for.you.

 

[Rat Rifle]

The problem is I don’t have any gunsmiths close by that I’m aware of. I hate the idea of mailing it out too. That’d make to too nervous it’d get lost or stolen.

You can do it. Follow a good “how to” video. Apply release agent to the action twice. Use Plumbers Putty and plenty of masking tape everywhere You don’t want compound. Don’t freak out if it is a little difficult to remove the barreled action from the stock.

 

[Vandelayindustries]

Is a chassis any different than a stock as far as bedding goes?