I have a Rem 700 which I'm going to have blueprinted, squared, trued, etc. Comes with a Hart barrel and I'm putting it into a Rem VLS stock. I've drill out the front and rear screw holes in the stock to about 12-13mm diamer and want to bed in a different phases. First I want to build up the pillars with Devcon epoxy and fit the action into the stock to form the pillars. When I get back the action from blueprinting, I was thinking of removing some of the pillar bedding material at the top and bottom, adding new Devcon and then bedding the whole thing. It was going to be a 2 part process. Anybody see any issues with this?
Bedding question
- Thread starter mousegunner
- Start date
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.