ogre1911
Silver $$ Contributor
I have a Bat B RBLPRE with two 30 in Krieger barrels. The one installed still shoots well the spare is unfired I was told since chamber was cut. Both were cut with same included reamer and these were the only chambers this reamer has cut. Barrels were left "rough cut" for outside finish and the discoloration you see is from me removing the old thick Velcro goo with brake cleaner.
Gunsmith was an armorer for the US Olympic team I was told. Can't remember the name but I think Young was the last name.
It has a pretty Maple laminate 3 inch fore end stock with a 2 in copper rudder and copper butt plate.
Trigger breaks cleanly and consistently at 2.3 - 2.5 ozs.
Comes with HEAVY protektor bag for the rudder and LOTS of extras as seen in pics. Dies, bushings, neck turning extras, 140 pces of exactly once fired (to fire form) virgin 6.5-284 Lapua brass that DJ opened and turned. All sized, 65 are primed and ready to load the other 75 are sized and chamfered just need primers.
It weighs 18 lbs 5.9 ounces with the Sightron.
Selling because I'm not neck turning, fire forming etc ANY MORE. And my neck/cheek/jaw is just not a fan of recoil any longer. Life's too short.
Does not come with scope, rings or level unless you want it, I'll include both prices.
This is a turnkey close to half minute gun at 1000 yds as it sits (I'll include shot marker pics) just need a front rest.
Not considering parting out unless it languishes here.
$3300 shipped for rifle and parts, not scope, rings or level.
$5000 shipped with included Sightron SVSS ED Scope, rings and level.
FFL MUST accept rifle from individual with Dl.
Postal mo or check and wait to clear from Gold or Silver member.
Thanks for looking
Gunsmith was an armorer for the US Olympic team I was told. Can't remember the name but I think Young was the last name.
It has a pretty Maple laminate 3 inch fore end stock with a 2 in copper rudder and copper butt plate.
Trigger breaks cleanly and consistently at 2.3 - 2.5 ozs.
Comes with HEAVY protektor bag for the rudder and LOTS of extras as seen in pics. Dies, bushings, neck turning extras, 140 pces of exactly once fired (to fire form) virgin 6.5-284 Lapua brass that DJ opened and turned. All sized, 65 are primed and ready to load the other 75 are sized and chamfered just need primers.
It weighs 18 lbs 5.9 ounces with the Sightron.
Selling because I'm not neck turning, fire forming etc ANY MORE. And my neck/cheek/jaw is just not a fan of recoil any longer. Life's too short.
Does not come with scope, rings or level unless you want it, I'll include both prices.
This is a turnkey close to half minute gun at 1000 yds as it sits (I'll include shot marker pics) just need a front rest.
Not considering parting out unless it languishes here.
$3300 shipped for rifle and parts, not scope, rings or level.
$5000 shipped with included Sightron SVSS ED Scope, rings and level.
FFL MUST accept rifle from individual with Dl.
Postal mo or check and wait to clear from Gold or Silver member.
Thanks for looking
Attachments
Last edited:
