Bart's 103g Dominator vs 105g Infinity

[kyreloader]

Can anyone describe the differences for me between the two listed bullets? Plan is to use this rifle for MR Fclass in a 7.5" twist and an 8.4" twist 6 Dasher barrels.

I am not sure what the differences are between these two bullets to decide which would be a better match for this type of competition. I assume I should try both and see which shoots better, but any insight you could give me regarding these bullets would be appreciated.

I would love to support a fellow Kentuckian.

Thanks in advance.

 

[johara1]

I've shoot small with all those, and now I will see what his new 105 will do. I can tell you this the new 105 is very uniform..... So I'm sure they will hammer..... Jim

 

[shoot4fun]

I've shoot small with all those, and now I will see what his new 105 will do. I can tell you this the new 105 is very uniform..... So I'm sure they will hammer..... Jim

Jim,
I got some 105 Infinity bullets of a prize table at the 600 yard Nationals I want to try. My question to you is will they shoot well off the lands or did you have to (not want to) jam them?
Thanks!

 

[johara1]

jumped around .010, and 32.2 rl- 15...... Jim

 

[jamesdmock]

Can anyone describe the differences for me between the two listed bullets? Plan is to use this rifle for MR Fclass in a 7.5" twist and an 8.4" twist 6 Dasher barrels.

I am not sure what the differences are between these two bullets to decide which would be a better match for this type of competition. I assume I should try both and see which shoots better, but any insight you could give me regarding these bullets would be appreciated.

I would love to support a fellow Kentuckian.

Thanks in advance.

Feed your barrel what it likes best. Bart told me that he had better results with the 103 over the 105 Infinity, but my barrel prefers the 105 Infinity. The 105 Dominator is also a great choice, but I don't know if it will be better in my barrel. Bart may have a new 105 out soon with a 13 ogive rather than a 15. If Bart puts a bullet on the market, you can be sure that it has been thoroughly tested. So far the 105 Infinity has been the best bullet for both my Dasher and 6 BR-AI. Good shooting...James

The picture shows a 3-shot group shot at 200 yards with the 105 gr. Infinity pushed by 30.6 gr. of H4895 in a 8 twist Brux barrel with Ezell tuner.

 

[tclaunch]

jumped around .010, and 32.2 rl- 15...... Jim

Is this load for the BR Ackley or Dasher?

 

[JDBraddy]

I've shoot small with all those, and now I will see what his new 105 will do. I can tell you this the new 105 is very uniform..... So I'm sure they will hammer..... Jim

I've shoot small with all those, and now I will see what his new 105 will do. I can tell you this the new 105 is very uniform..... So I'm sure they will hammer..... Jim

Shot this 5 shot group at 200yds testing them out in my new Dasher Wensday, shot five different load ladders, this load was the best or tied for the best in all five ladders, so I think it will become my new load, have to start palying with the tuner now.

 

[johara1]

Is this load for the BR Ackley or Dasher?

That was for the 6br imp. with a old Brux 7.83 barrel it just hammered them

 

[johara1]

Jim, on the 105 guninger start out throttled back some. I didn't get very far before freeze up, but did discover that they make pressure sooner then some other similar weight bullets.

Tom

Thanks Tom, once I get the gun done and the temp get reasonable I will give them try, I did some testing and they seem reasonable and they sure are uniform...... Jim

 

[kyreloader]

Even more confused now.

103g Dominator, 105g Infinity, 105 Dominator, 105 Guninger, 13 vs 15 ogive, etc.

Can anyone clarify some of the differences between these bullets? Is there a way I can get 100 or so of each to trial?

Thoughts??

 

[Alex Wheeler]

I would bet @BartsBullets could tell you the difference.

 

[JDBraddy]

Even more confused now.

103g Dominator, 105g Infinity, 105 Dominator, 105 Guninger, 13 vs 15 ogive, etc.

Can anyone clarify some of the differences between these bullets? Is there a way I can get 100 or so of each to trial?

Thoughts??

Just Call Bart's, he's usually happy to talk to ya, just don't keep him on the phone too long or he won't get any bullets shipped. They've sent me out samples of one or two hundred to try out before. Bet they'd do the same for you.

(270) 879-4279

 

[kyreloader]

Just Call Bart's, he's usually happy to talk to ya, just don't keep him on the phone too long or he won't get any bullets shipped. They've sent me out samples of one or two hundred to try out before. Bet they'd do the same for you.

(270) 879-4279

Will do guys, thanks!!

 

[nmkid]

Not shooting a Dasher but, any idea what Bart's 6mm bullets will do at higher velocities, (3200-3300)?

 

[BartsBullets]

Not shooting a Dasher but, any idea what Bart's 6mm bullets will do at higher velocities, (3200-3300)?

As long as the gun is tuned they will shoot fine. I know the 105s have been shot at 3295 without the coming apart.

Bart

 

[JohnMill]

Jim, on the 105 guninger start out throttled back some. I didn't get very far before freeze up, but did discover that they make pressure sooner then some other similar weight bullets.

Tom

Made me look like I might know what I'm doing.

 

[JamesnTN]

Bart,

Who’s jackets are you using on your bullets?

 

[BartsBullets]

Bart,

Who’s jackets are you using on your bullets?

James,

Sierra for long range

Bart

 

[tclaunch]

jumped around .010, and 32.2 rl- 15...... Jim

Mr. O`Hara, this was right on the money! A buddy gifted me 100 of Barts Gungnirs shot this with Fed 205M and found happiness!! Thank you!

Makes a guy wonder how long is that dang bullet line by now......

 

[tclaunch]

Thanks Gabe, put those to mighty good use!!