SOLD Barrel, brass, dies -25 saum

[Harv87]

I had a rifle i built and shot less then 40 rd through it then had a guy offer to buy the winchester 70 action so desided to part it out.

So i have a shelin 26 inch med sporter barrel fits with winchester 70 action chambered for 25 saum threaded 5/8 24 on muzzle. It shot very well with the new 134 elds .300 with 3 shot group a 200 yds will also sell 7mm suam bushing die set that was used to neck down the 100 pic of norma brass for this barrel. Brass has been neck turned and ready to go

Price for everything 600 to ur door obo
Price drop 550
Price drop 500

 

[Kurz]

barrel fits with winchester 70 action

Should we presume this is a Post-'64 action?

Who threaded and chambered the barrel?

Thanks!

 

[Harv87]

Yes sorry i didnt put that

 

[Harv87]

Bump

 

[cowboybart]

Tag this

 

[Harv87]

T

 

[Harv87]

T

 

[Jordandavelaar]

You neck turned which I assume to take any excess brass out when sizing down. Is this considered a no turn neck or is it a tight neck chamber?

 

[cowboybart]

Does the barrel have the extractor cut??

 

[Harv87]

You neck turned which I assume to take any excess brass out when sizing down. Is this considered a no turn neck or is it a tight neck chamber?

I turned the necks do to using 7mm saum brass if you use 6.5 saum brass then the necks would not need to be turned

 

[Harv87]

Does the barrel have the extractor cut??

No the action this cam off of has the sliding extractor in the locking lug of the bolt not the mauser style so there is no extractor cut in the barrel. But if you wanted to put one in it could be done easy enough

 

[Harv87]

Should we presume this is a Post-'64 action?

Who threaded and chambered the barrel?

Thanks!

Threaded and chambered by RWB Innovations Inc in Oakland MD

 

[Harv87]

550 price drop

 

[crystalgayleguy]

Was this on a long action or a wsm action

 

[crystalgayleguy]

Pics please

 

[Harv87]

Was this on a long action or a wsm action

I had it on a wsm action butno reason it wouldnt go on a long action

 

[Harv87]

Here some pics the dies are 7mm saum redding bushing dies and i swap the bushings out

 

[Harv87]

Pics please

Pics are posted

 

[Harv87]

Now 500 some one needs this lol

 

[crystalgayleguy]

What twist