AutoTrickler V4 Wind Screen

[Custonbuilt6BR]

Looking for a AutoTrickler wind screen with a door to block the wind at outdoor matches.

 

[madmixerman]

@JustDreaming

Makes a nice enclosed riser.

 

[21PHX]

Get in touch with Bart @BartsBullets

 

[rlporter507]

a member here makes a really nice one with 2 sliding doors in the front. I got one and got him to not drill the hole in the top, i dont have a trickler. I like to load the scale from the side, so i dont use it, I would sell for $75 shipped cont USA and you could drill the top hole where you need it. its 1/4 inch thick plexiglass, well made. it has a adjusting screw in the rear to level the trickler.
pm me if interested.

SELLING Thread 'AUTOTRICKLER V4 – Riser Mod'

Jan 20, 2022

Hey all,
Just finished up a new version for the AutoTrickler V4, if anyone is interested.
-------------------------------------
Update: I've done a minor tweak to the risers (thx for the idea Lawrence97) and have included an nylon adjustment thumb screw in the rear wing to allow tilt adjustment for your ATv4 trickler. While I do include a rubber bumper on the rear, you can pop this off. This should help prevent the need for shimming the unit to adjust the feed flow from the smaller trickler tube as mentioned in the manual.

Additionally, with some powders, I find that is your are...

• JustDreaming
• at3 at4 autotrickler riser scale riser
• Replies: 103
• Forum: Tools, Dies, Rests, Reloading Components & Misc

• 

 

[Leeinmichigan]

Not sure if this might be an issue with the AutoTrickler, but this past weekend I was shooting a NBRSA group match at Shelby Co. Deer Hunters range in southern Ohio. The temperatures were hitting the lower 90s, and a fellow shooter loading along side me under a canopy was using a newer RSBS powder dispenser in an enclosed (wind protected) clear plastic box. Around noon, the scale wound not hold zero. He finished the match using the old method of loading his rounds, and placed the dispenser inside his A/C trailer. The next morning everything was working fine. He used it again, but without the wind box the that day (which was even hotter), and never had a problem. We hypothesized that the box wasn’t allowing any cooling in the extreme heat.