AUTOTRICKLER V3

[fbraun]

Can anyone tell me how to change the wiper blade in the AUTOTHROW? I can’t seem to find any information on that. The Autothrow recently started to give as much as 0.7 grain variation on powders such as N150. It’s also locked up a couple of times in the beginning of the cycle.

 

[madmixerman]

@adamjmac

 

[fbraun]

@adamjmac

I’ve already emailed Adam. No answer so far

 

[F Class John]

You have to disassemble the rotating part of unit and you’ll see the black wiper in there.
Edit: what I mean is remove the drum part from the housing and you’ll see it in there.

 

[fbraun]

You have to disassemble the rotating part of unit and you’ll see the black wiper in there.
Edit: what I mean is remove the drum part from the housing and you’ll see it in there.

Thank you. I thought as much but I seem to remember that someone (perhaps you in one of your past videos ) mentioned that it could be installed backwards? Can you please clarify?

 

[F Class John]

Thank you. I thought as much but I seem to remember that someone (perhaps you in one of your past videos ) mentioned that it could be installed backwards? Can you please clarify?

It's been a while since I did it but there's a little tab across one side when you put take the old one out make sure you see which way it faces. in my head it faces opposite of what you'd think but just take a look and you'll see which way it goes.

 

[INTJ]

N570 doesn't work well with a V3 thrower, and replacing the wiper may not help.

 

[fbraun]

I mentioned N150 and not N570

 

[INTJ]

I mentioned N150 and not N570

Whoops....I must have N570 on the brain. BTW, if you were wondering, N570 doesn't work with the V3 Autothrow.......

 

[Chiquita]

I know mine nay cime up for a repair, so just Curious if you have a picture of the wiper?

 

[fbraun]

I know mine nay cime up for a repair, si just Curious if you have a picture of the wiper?

I can post a photograph on Monday.