Auto Trickler V4 Powder Thrower Accessories

[spud1967]

Now ordering a v4 for my self, is there any accessories of note that would be nice to add, i belive one is made by a member but can not find any details

any help would be appreciated

 

[MikeRu]

Now ordering a v4 for my self, is there any accessories of note that would be nice to add, i belive one is made by a member but can not find any details

any help would be appreciated

Post in thread 'AUTOTRICKLER V4 – Riser Mod'
https://forum.accurateshooter.com/threads/autotrickler-v4-riser-mod.4055900/post-39374199

 

[madmixerman]

Now ordering a v4 for my self, is there any accessories of note that would be nice to add, i belive one is made by a member but can not find any details

any help would be appreciated

Get an extra glass cup. Speeds up reloading process.

 

[PatMiles]

Buy the IP cup...it's the only cup that works!

 

[rkb21]

MK Machining has some nice updates for the V4

 

[spud1967]

Thanks guys I’ll do some research

 

[spud1967]

Get an extra glass cup. Speeds up reloading process.

Will they still zero down the same?

 

[spud1967]

Buy the IP cup...it's the only cup that works!

IP ?

 

[quest450]

IP ?

Ingenuity Powder cup

ingenuityprecision.com

 

[rwj]

Will they still zero down the same?

Probably not… you’ll need to remove some material from the handle on the “heavy” one.

Alternatively, you could seat the bullet in the case just charged while the dispenser is refilling the cup… thereby eliminating the need for a second cup…

 

[Walt Krafft]

It takes as long to seat a bullet as it takes to measure a charge. I dont think a second cup is needed.

 

[Chaotik]

If you have access to a 3d printer:
https://forum.accurateshooter.com/threads/powder-cup-for-v4.4170361/#post-39373381

 

[D Coots]

It takes as long to seat a bullet as it takes to measure a charge. I dont think a second cup is needed.

Works for me also, but maybe from conversations here some are lookin for faster for their applications.

 

[sgav8r]

Now ordering a v4 for my self, is there any accessories of note that would be nice to add, i belive one is made by a member but can not find any details

any help would be appreciated

Expect to wait about a MONTH for it to ship (if you bought it from MacDonald Innovations). Other than that hassle the machine is great. I recommended the riser mod from @JustDreaming, an IP cup, and the new overserts from MK Machining. You’ll be all set!

 

[madmixerman]

It takes as long to seat a bullet as it takes to measure a charge. I dont think a second cup is needed.

Press and scale are on separate benches. Rather charge all cases first then seat all bullets . Works for me with two cups.

 

[muleystalker]

Probably not… you’ll need to remove some material from the handle on the “heavy” one.

Alternatively, you could seat the bullet in the case just charged while the dispenser is refilling the cup… thereby eliminating the need for a second cup…

or you can put scotch tape on the lighter one until its the same weight.

 

[wkdickinson]

Get an extra glass cup. Speeds up reloading process.

Also, if you drop them on concrete floor, they break -ask me how I know

 

[muleystalker]

Also, if you drop them on concrete floor, they break -ask me how I know

Ditch the class cup and get a couple little stainless steel condiment cups like these. Glue or solder a handle of your choice be it wood, plastic or metal/copper. If yo think you will have problem with powder splash just cut a thin piece of craft foam or silicon mat just a little bigger that the inside bottom diameter and place in the bottom so the middle of foam is just proud of the bottom bet the edges are on the bottom. It will act like the IP cup and deaden the powder velocity as it falls into the cup.

 

[sgav8r]

Ditch the class cup and get a couple little stainless steel condiment cups like these. Glue or solder a handle of your choice be it wood, plastic or metal/copper. If yo think you will have problem with powder splash just cut a thin piece of craft foam or silicon mat just a little bigger that the inside bottom diameter and place in the bottom so the middle of foam is just proud of the bottom bet the edges are on the bottom. It will act like the IP cup and deaden the powder velocity as it falls into the cup.

Or… IP cup(s). They’re $22 apiece on his website. Best cup you’ll ever use imo.