prone.life
Silver $$ Contributor
SPF
Atlas CAL BT65 Bipod w/ Area419 ARCA Clamp and Barricade Stop
Asking $250 shipped {$370 new from Area419}
Selling a used Atlas BT65 with Area419 ARCA clamp and barricade stop. Used for one NRL22 season; minor cosmetic blemishes but fully functional. This is for an Arca rail, not picatinny.
Atlas CAL BT65 Bipod
About the CAL Series: Fulfilling requests for an Atlas without the ability to Cant prompted creation of the CAL (Cant And Loc) Atlas® Bipod. It delivers the same novel Atlas feature of five independent leg positions – including the patented 45° leg position – but without the Pan function to ensure the bore stays perpendicular to the bipod legs. Features 63º of adjustable, preloaded Cant and a wide footprint. Made in the USA.
Adjustable, preloaded Cant with additional tension lever made possible using original KMW Pod-Loc
ARCA Clamp and Barricade Stop
Clamp Features:
– Proprietary two-stage screw design.
Clamping screw features two different thread pitches. The coarse 16tpi is used when no tension is on clamp, allowing rapid movement of the clamp vs others on the market. With high speed comes low torque though, so to counteract this as soon as the clamp sees tension it will switch to the 32tpi threads in the knob to give you extra torque when not using on an ARCALOCK rail.
~1/4 turn releases the clamp from the detents on the ARCA rail for movement.
One turn fully releases clamp to be removed from rail
– Clamp directly bolts to Atlas Bipods using their factory hardware (excluding the 2-screw bipods. QD and NC only)
Barricade Stop
- Teeth on front dig into barricade for ultimate grip
- Machined in house from 6061-T6
Atlas CAL BT65 Bipod w/ Area419 ARCA Clamp and Barricade Stop
Asking $250 shipped {$370 new from Area419}
Selling a used Atlas BT65 with Area419 ARCA clamp and barricade stop. Used for one NRL22 season; minor cosmetic blemishes but fully functional. This is for an Arca rail, not picatinny.
Atlas CAL BT65 Bipod
About the CAL Series: Fulfilling requests for an Atlas without the ability to Cant prompted creation of the CAL (Cant And Loc) Atlas® Bipod. It delivers the same novel Atlas feature of five independent leg positions – including the patented 45° leg position – but without the Pan function to ensure the bore stays perpendicular to the bipod legs. Features 63º of adjustable, preloaded Cant and a wide footprint. Made in the USA.
Adjustable, preloaded Cant with additional tension lever made possible using original KMW Pod-Loc
ARCA Clamp and Barricade Stop
Clamp Features:
– Proprietary two-stage screw design.
Clamping screw features two different thread pitches. The coarse 16tpi is used when no tension is on clamp, allowing rapid movement of the clamp vs others on the market. With high speed comes low torque though, so to counteract this as soon as the clamp sees tension it will switch to the 32tpi threads in the knob to give you extra torque when not using on an ARCALOCK rail.
~1/4 turn releases the clamp from the detents on the ARCA rail for movement.
One turn fully releases clamp to be removed from rail
– Clamp directly bolts to Atlas Bipods using their factory hardware (excluding the 2-screw bipods. QD and NC only)
Barricade Stop
- Teeth on front dig into barricade for ultimate grip
- Machined in house from 6061-T6
Attachments
Last edited:
