• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Arca for Seb JOYPOD x

I’m just guessing, since I haven’t had a Joypod for a while, but I believe the 2 bolt spacing is pretty standard.
 
Looks like two options are possible. Easiest way is arca clamp with pic adapter through area 419. Second would be removing pic clamp from joypod and make adapter that would bolt in place then you can bolt arca clamp to it. This would be pretty easy also just 2 countersink holes to joypod and 2 thread holes for arca clamp, this would would be lower in overall height.
 
Badhabit said:
Looks like two options are possible. Easiest way is arca clamp with pic adapter through area 419. Second would be removing pic clamp from joypod and make adapter that would bolt in place then you can bolt arca clamp to it. This would be pretty easy also just 2 countersink holes to joypod and 2 thread holes for arca clamp, this would would be lower in overall height.
Click to expand...
Awesome thanks for the input, I’ll have to get measurements when mine comes !
 
Experimenting with "double duties" (two in one) picatinny and Arca attachment.
I could probably make it as standard in the future?
The picatinny piece with T-slots, if it's still required, I have to make it a bit taller (about 1,5- 2mm taller) to be able to use it, assuming the foreend bottom is flat.
Also that I have to make the attachment to accept most aftermarket Arca because some seems to be smaller than standard. *(See the gap between the main part and the clamping plate, it would allow to grip the smaller Arca)
What do you think?

Arca on top left, Picatinny top right, the experiment bellow.
IMG_20250223_104920.jpg

The experiment bellow, I want to keep it to be as light as possible.
IMG_20250222_165431.jpg

The detail. Alum 7075 is used on any parts that need to be stronger.
IMG_20250222_165318.jpg
 
Last edited:
seb said:
Experimenting with "double duties" (two in one) picatinny and Arca attachment.
I could probably make it as standard in the future?
The picatinny piece with T-slots, if it's still required, I have to make it a bit taller (about 1,5- 2mm taller) to be able to use it, assuming the foreend bottom is flat.
Also that I have to make the attachment to accept most aftermarket Arca because some seems to be smaller than standard. *(See the gap between the main part and the clamping plate, it would allow to grip the smaller Arca)
What do you think?

Arca on top left, Picatinny top right, the experiment bellow.
View attachment 1639460

The experiment bellow, I want to keep it to be as alight as possible.
View attachment 1639459

The detail. Alum 7075 is used on any parts that need to be stronger.
View attachment 1639461
Click to expand...
Yeah to me that fixes both issues and makes it more universal for everyone . Awesome work Seb! But in the mean time I’d like to purchase the Arca adapter for the joypodx.
 
Plus the universal clamp would make it easier for you logistically because you would only need to stock one clamp, same clamp on all bipods. Win Win, best of both worlds.
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,806
Messages
2,203,016
Members
79,110
Latest member
miles813

Share This Page

Back
Top