Arbor press depriming tool?????

[P1ZombieKiller]

I am wondering if they make a wilson style (arbor press) depriming die for a 30BR? I do not want it to do anything but deprime. Do I need to get a 30BR bushing style die and just leave the bushing out?

is this what i need? http://www.sinclairintl.com/product/11056/30-BR-Remington-Reloading-Dies

If you know of something else, can you please post a link to it here?

I am wanting to be able to deprime my fired cases in the field. I normally use a Harrels die which is 7/8" threaded. My press that uses that die is mounted in my loading room, and is not able to go into the field.

 

[JohnHenry]

Deprime by hand using Neil Jones decapping tool. www.neiljones.com

 

[alf]

I use a Wilson neck sizing die. No need to run it in first like you're sizing, just press the primer out with the stem.

 

[mikecr]

+1 for the hand decapper
Works great

 

[hawghunter]

+1 for the Neil jones

 

[GermanS1]

Wes, Wilson makes a separate decapping rod, all you need is the rod and a base (along with the arbor press).

 

[AlNyhus]

Here's what I've used for 10 years.

Sinclair's decapping base: http://www.sinclairintl.com/product/8023/Decapping-Units

Plus a Lee Case Length Guage for a 30-06: http://www.leeprecision.com/cgi/catalog/browse.cgi?1274293569.788=/html/catalog/casecon.html

I cut the threaded stud off the Lee gizmo and polished the pin part to .058. The shaft diameter of the 30-06 decapper pin fits perfectly in the fired neck.

For what it's worth........ -Al

Lee also makes a decapper and base that would probably work for small money.

 

[P1ZombieKiller]

Wes, Wilson makes a separate decapping rod, all you need is the rod and a base (along with the arbor press).

Exactly what i'm looking for. THANKS