Anyone here using the Lyman Express case trimmer?

[koger]

Watched the Ultimate Reloader episode on Youtube, several other ones on there, most were favorable. Do any of you know if you have to chamfer and deburr after you trim with this, or is it done in the process. The UR segment looked pretty clean, but nothing was said on this subject.

 

[Paul Hilgedick]

Yes you need to chamfer and deburr after trimming. I use a Hornady case prep unit that holds both tools. Other trimmers are faster but for the volume I have this works fine for me.

Paul Hilgedick

 

[Dgd6mm]

Yes you need to chamfer and deburr after trimming. I use a Hornady case prep unit that holds both tools. Other trimmers are faster but for the volume I have this works fine for me.

Paul Hilgedick

The Lyman only trims the brass.

These are the tools I use also.

 

[JB10]

A buddy bought one. Likes it but will have to chamfer and debur after trimming

 

[Mr Wick]

I returned the Frankford and bought the Lyman. I could not be happier. Sweet, solid, results every time.

 

[moondog]

I've been happy with mine. Burnt out the motor and they sent a new unit. I did have to run a chamber reamer in a couple of bushings for wildcats.

 

[Jester560]

I have the trimmer and the Lyman class prep center. It holds all the tools needed to chamfer, debut and primer pocket work.

 

[koger]

Thanks guys, I also have the Hornady 2 tool rechargeable case prep tool, works well.