• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Alpha Munitions Brass 6 PPC For Sale

brunos

Site $$ Sponsor
We just received our first shipment of Alpha Munitions 6mm PPC brass! We have 1,300 pieces left for sale, and are taking backorders for our next shipment that will be in early October. The brass that we have in stock currently has a limit of 100 pieces, we will not be limiting backorder quantities.

LINK TO BUY : https://www.brunoshooters.com/product/alpha-munitions-brass-6mm-ppc/

Please feel free to call with questions or to place a backorder if the brass shows out of stock on our website!
623-587-7641

ppc alpha-Photoroom.pngppc alpha1-Photoroom.pngppc alpha2-Photoroom.png
 
Clancy said:
Can you let us know if the necks are tapered and out of whack? Alpha makes the toughest brass I’ve ever shot, but I got sick of neck turning for no turn chambers.

Either way, I’m glad to see it on the market.
Click to expand...
You could open the chamber neck ID. I do this pretty often to accommodate no turn brass. I probably would not recommend this in "normal" times..whatever that means. But with no Lapua, other options have to be explored.
 
gunsandgunsmithing said:
You could open the chamber neck ID. I do this pretty often to accommodate no turn brass. I probably would not recommend this in "normal" times..whatever that means. But with no Lapua, other options have to be explored.
Click to expand...
Opening the neck won’t fix tapered case necks. May have misunderstood me.

The Alpha I have used was very tough, but had poor neck concentricity, and taper in the necks. Turning it was the fix. I don’t even believe in turning Lapua, but I had to turn the alpha.

I’m hoping the PPC doesn’t have this problem, but I’m waiting to get a batch of several hundred before buying a no turn Reamer for it- assuming it’s concentric.

If not, I’ll just keep shooting a BR.
 
Clancy said:
Opening the neck won’t fix tapered case necks. May have misunderstood me.

The Alpha I have used was very tough, but had poor neck concentricity, and taper in the necks. Turning it was the fix. I don’t even believe in turning Lapua, but I had to turn the alpha.

I’m hoping the PPC doesn’t have this problem, but I’m waiting to get a batch of several hundred before buying a no turn Reamer for it- assuming it’s concentric.

If not, I’ll just keep shooting a BR.
Click to expand...
I may have, yes. Then again, the taper you see might go away with fire forming. Different ways of measuring that kind of thing can give different end results but I'm not gonna disagree at all. Just don't know over the keyboard.
 
R.Morehouse said:
Just ordered a box. Looking forward to comparing it to the Lapua Bule & Gold I have and use in both 262 & 268.......If it is the quality I have found their Dasher brass to be, I will be a happy camper.

Regards
Rick
Click to expand...
If it is as consistent as the Alpha ARC brass that I got a month ago I'll be very surprised if you're unhappy with it. Dimensionally speaking that brass was the most consistent I've ever had, and for sure, no out of round necks and case mouths, and a custom box adequately packaged. Not a whole lot more a person could ask for IMHO. JME. WD
 
Tom Danielson said:
What cases are you referring to that were tapered?
Click to expand...
All of my 6GT brass had tapered necks.
I first noticed it because I had to turn for clearance when I used your brass with the original GAP print. Has this since been resolved?

I have the video of turning the cases but I don’t know how to post a video.

IMG_2308.jpeg

Here’s a screen shot during the video. I was taking .002 total off, .001 per side.

I haven’t had the need to buy any more since that batch, but I’m looking into a no turn PPC and y’all’s new brass is a no brainer but I had to ask if that had been resolved.
 
Last edited:
Clancy said:
All of my 6GT brass had tapered necks.
I first noticed it because I had to turn for clearance when I used your brass with the original GAP print. Has this since been resolved?

I have the video of turning the cases but I don’t know how to post a video.
Click to expand...
if you have the original GAP print based off converted 6.5x47 brass that is the issue. When we launched production brass the reamer print was updated, which is now the print that is SAAMI approved.
 
Tom Danielson said:
if you have the original GAP print based off converted 6.5x47 brass that is the issue. When we launched production brass the reamer print was updated, which is now the print that is SAAMI approved.
Click to expand...
Tom, I updated my post again. You probably hadn’t seen it before the reply.

I have the legacy Reamer now, but still shooting the turned batch of brass.
 
Clancy said:
Tom, I updated my post again. You probably hadn’t seen it before the reply.

I have the legacy Reamer now, but still shooting the turned batch of brass.
Click to expand...
You will have no issue with non turned GT brass in a legacy/SAAMI reamer. The production GT was never designed to work in the original GAP chamber, I am sure that was the issue.
 
Tom Danielson said:
You will have no issue with non turned GT brass in a legacy/SAAMI reamer. The production GT was never designed to work in the original GAP chamber, I am sure that was the issue.
Click to expand...
The reamer creates taper in the case neck?

Straight out of the box? Unfired?

No sir.

I know you’re busy but please take the time to read my question. I’ll save you the time of re-reading and just ask is this 6PPC roughly .002 thinner at the mouth for approximately 1/4 of the length of the case neck? I don’t nickel and dime so if I’m going to buy a lifetime supply, I’d like to know ahead of time.

Thank you for your time.
 
Last edited:
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,841
Messages
2,204,682
Members
79,160
Latest member
Zardek

Share This Page

Back
Top