I installed a Timney Trigger in my Rem.700 and have it adjusted to 1 1/2 lbs. It passes the slam bolt closed and hitting the barreled action on the floor test. When I put the trigger on safety then pull the trigger then take it off safety the rifle fires. The procedure I use to adjust the trigger is to,1) adjust the sear engagement,2) adjust the over travel,3) adjust the trigger pull weight. I have adjusted the trigger three times. Can someone tell me what the problem might be. Thank You Norman
Adjusting Timney Trigger Rem. 700
- Thread starter norman38
- Start date
Try adjusting the sear engagement so it has a little more travel,creep?) and see if that clears it up. Thats the only thing I can think of that might fix it.
If not than you might want to send it back.
If not than you might want to send it back.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.