• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

ADG 7 Saum & 6.5 Saum brass available now.

rhovee

I really like ADG 338 edge brass. They are a somewhat newer company but make awesome brass. Alex Wheeler is a fan as well. They just dropped the 7 saum and 6.5 saum brass online. I have some but have not shot it yet. The loaded neck is .317 and weight is 220 grains. Norma is .315 neck and 235 grains on my current lot.
 
Last edited:
I had just gotten in a bunch of 7 SAUM to neck down for 6.5 SAUM origin build. Them being from Ky, as I am myself, I figured I would grab a couple boxes to try out. Good thing I have a 7 SAUM already, so will just rotate the brass I was going to neck down, will be different headstamp though (was going for some sort of separation so I don't get them mixed up), into my 7 SAUM reloading storage. Will be my first experience with ADG, so hopefully it does good. Like to support Ky companies and they make 7 types I currently shoot/reload, with a couple that are cartridges that are in planned future builds.
 
rhovee said:
I really like ADG 338 edge brass. They are a somewhat newer company but make awesome brass. Alex Wheeler is a fan as well. They just dropped the 7 saum and 6.5 saum brass online. I have some but have not shot it yet. The loaded neck is .317 and weight is 220 grains. Norma is .315 neck and 235 grains on my current lot.
Click to expand...
Thanks for the heads up. Been waiting for this. Just ordered 50 7 SAUM brass.
 
My 6.5-4s has a loaded round neck diameter at .289", no turn reamer used, sure wish they'd gone thinner vs thicker!
 
steve123 said:
My 6.5-4s has a loaded round neck diameter at .289", no turn reamer used, sure wish they'd gone thinner vs thicker!
Click to expand...

That 0.317" figure is for the 7mm SAUM brass.

The 6.5 SAUM:

Description
6.5 SAUM (Short Action Ultra Mag)

GET SAUM NOW!

Designed to work with chambers cut with the .296 neck reamer. No neck turning required!

Available in our standard finish with the anneal line visible or our bright finish that has had the anneal line polished off.
 
Ah, right, wonderful.

I was like, darn, those are some thick necks, lol. Just wasn't thinking 7mm since I don't have one.
 
Just ordered 200 pieces of 7mm SAUM from them to check out in my 257 SAUM Imp...
Sure hope they are as good as everyone's thinking...
 
The 7 RSAUM brass didn't last long either. Just tried to order some and that's out too now.
 
I got my ADG 7 SAUM brass today. The brass looks good except for one thing , the measurement at the .200 line is over .005 less than my chamber......Anyone besides me think this might be a problem?
 
You must log in or register to reply here.

Similar threads

7 Saum Brass
Replies
1
Views
225
SKWERLZ
300 saum die for 7 and 6.5?
Replies
0
Views
525
nwmnbowhunter
SOLD ADG Brass 7 SAUM
Replies
2
Views
319
Relic
Relic

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
166,315
Messages
2,216,400
Members
79,554
Latest member
GerSteve

Share This Page

Back
Top