Adding Ejector to Hall Action

[knguyen]

Action: hall M action, RB no ejector
I currently have this rifle action, hall M
Does anyone know of a person or smith who can help with getting an Ejector added for this bolt
Bolt already has the ejector hole already made but when I got rifle, there was no ejector in it.
Thank you

 

[WillyTP]

Does it have the hole in the side of the bolt for the pin? If it does then most likely you can install it yourself. It’s only 3 pieces, a spring, the ejection plunger and the roll pin to keep it all in the bolt

 

[knguyen]

Yes it does have the hole on the side

 

[WillyTP]

I’m not sure if you can find an original one but there’s probably something you could get based on the diameter and depth of the ejector hole.

 

[SmokinJoe]

Contact the guys that do bolt work, like carlsbad or grimstod. They may have one that was removed from an action, or could easily make one.

 

[jackieschmidt]

Have you thought about converting it to a drop port. I have a Farley that started life as a regular R/L no eject and I converted it to a drop port.

 

[knguyen]

Have you thought about converting it to a drop port. I have a Farley that started life as a regular R/L no eject and I converted it to a drop port.

How hard would that be to do? Do you know of a smith who can do that?
Thank you

 

[jackieschmidt]

You have to install a Sako style extractor in the bottom of the bolt and cut a port in the bottom of the action for the spent round to fall out of. The stock also has to have a cavity cut so the round can fall out.

It’s not that difficult to do, finding someone to do it is the problem.