Poor Shot 65
Silver $$ Contributor
Action Removal Tool (second run)
I use this to remove actions from their bedding so that the action is removed straight up and not at an angle (thus chipping the bedding). Also can be used to remove glued in actions - apply the tool and then use a heat gun to break the glue.
This works by sliding onto the picatinny rail and then tightening a nut to pull the action directly up from the stock.
It will fit over action diameters that range from 1.35" (BAT Model B etc) to 1.47"+ (Black Knight etc)
I made several of these for some people who I shoot with and they thought it worked very well.
I had to raise the price to $60 for this run because of aluminum and shipping costs ate me alive on the last run. Most likely this will be the last run for this.
$60 to your door - CONUS only




I use this to remove actions from their bedding so that the action is removed straight up and not at an angle (thus chipping the bedding). Also can be used to remove glued in actions - apply the tool and then use a heat gun to break the glue.
This works by sliding onto the picatinny rail and then tightening a nut to pull the action directly up from the stock.
It will fit over action diameters that range from 1.35" (BAT Model B etc) to 1.47"+ (Black Knight etc)
I made several of these for some people who I shoot with and they thought it worked very well.
I had to raise the price to $60 for this run because of aluminum and shipping costs ate me alive on the last run. Most likely this will be the last run for this.
$60 to your door - CONUS only













