• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

A safe SA revolver

I just saw some of his comments. He said that he pulled the hammer back, and as he released the hammer it went off. So did he possibly not pull the hammer all the way back to catch?
 
Well… this should be pretty well documented on video, there should be zero speculation as long as nobody messed with the video
You'd think that film would be rolling but I haven't heard any mention of investigators saying they're reviewing any recordings.

I've haven't shot too many SA Colt style revolvers but riddle me this, if you don't fully cock the hammer is the cylinder timed enough to have a primer strike if you release the hammer before full cock? Wouldn't the sear catch on the half cock notch of the hammer unless the trigger is pressed?
 
The first thing my father taught me was treat every firearm as if it's loaded so never point a firearm at anything you don't intend to shoot. I don't know what's so hard about understanding that!

Hollywood glorifies gun violence then blames law abiding target shooters and hunters for all the gun violence in this country. If Baldwin is so anti-gun then why is he making movies that glorify gun violence? He speaks with forked tongue. The whole Hollywood thing makes me want to puke!
 
First of all , I don't believe much of anything coming out of that POS Mouth. U all ever hear the expression, "She went off half cocked . " ??? Anyway fifty years ago an old Colt SAA was a more common thing to see in a gun store or at the range. The Old School Peacemakers needed special handling attention to prevent such a bad happenstance. I was taught to load those old guns w a simple procedure to keep them safe. Pointed in a safe direction. Then At half cock the loading unloading gate is opened. Give it [the cylinder] a spin around to see the chambers .. Remove any cartridges live or spent. Then to load. insert one, skip one, Load Four. Bring hammer to rest on the empty cylinder chamber. Then & only then can you consider one of those revolvers safe to handle or carry. I hope this helps you understand even way back when; People knew how to be safe with firearms. Uncle Mike in Ct.
 
Baldwin should have been arrested and charged with the very least (Manslaughter) but being a hollywood VIP, anti-gun advocate and a total fruitcake, no one will charge him.
If any common man or woman, had done the very same thing with a gun and someone was killed and another injured, they would have been charged within minutes, if not days, for such.
I bet he is also a communist Democrat and supports Biden/Harris and the rest of them.
 
Anytime I run into an anti gun nut, I calmly explain that I’ve owned and shot my guns for 50 years and they’ve NEVER HURT ANYBODY!!!
In the current climate, I wonder what would have happened if the victim was a blac...oh..... never mind!
 
Last edited:

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,851
Messages
2,204,109
Members
79,148
Latest member
tsteinmetz
Back
Top