a good flash hole deburring tool

[PAshooter20BR]

Can anyone recommend a flash hole deburring tool? Not very familiar with them.

thanks

 

[billmo]

K & M is a high quality deburring tool aand easy to use. Ken is a very knowledgable and outstanding guy to do business with. Bill

 

[trgtsnpr]

I"ll 2nd billmo the k&m flash hole deburring tool works great you can pick one up for 15.00 and they work great heres a picture of one make sure you get the right one there is a .062 and a .080 check flash hole dimention.

 

[kochie]

you can try a number 53 letter drill it works good for the small flash holes like on your lapua cases

 

[Dans40X]

I'll second the use & operation of the K&M flash hole deburr tools.

It's basicly a center drill of .062/.080" diameter pilot with a sleeve around the body as a built in stop so each & every deburred flash hole is the same.
Cases do not have to be trimmed to length as required by most of the other deburring tools.
The stop is built into the tool ready to deburr flash holes.

Go easy with a #53,.0595") number drill bit-consentricity is the name of the game,off center flash holes aren't conducive to accuracy.