• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

a good flash hole deburring tool

K & M is a high quality deburring tool aand easy to use. Ken is a very knowledgable and outstanding guy to do business with. Bill
 
I"ll 2nd billmo the k&m flash hole deburring tool works great you can pick one up for 15.00 and they work great heres a picture of one make sure you get the right one there is a .062 and a .080 check flash hole dimention.
 

Attachments

  • KMFHU.jpg
    KMFHU.jpg
    8.6 KB · Views: 150
I'll second the use & operation of the K&M flash hole deburr tools.

It's basicly a center drill of .062/.080" diameter pilot with a sleeve around the body as a built in stop so each & every deburred flash hole is the same.
Cases do not have to be trimmed to length as required by most of the other deburring tools.
The stop is built into the tool ready to deburr flash holes.

Go easy with a #53,.0595") number drill bit-consentricity is the name of the game,off center flash holes aren't conducive to accuracy.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,830
Messages
2,204,522
Members
79,160
Latest member
Zardek
Back
Top