Boatschool02
Silver $$ Contributor
Original owner.
Scale purchased from CE in March of 2018.
AutoTrickler V2 purchased new, sometime shortly thereafter.
I went through the set-up instructions one time and then never messed with it again.
Used to load many 1000s of quality test & match rounds, without any issue.
(I plugged everything back in last week and dispensed a couple charges with N160. No change.)
Please see photos for some signs of age & use, mostly minor nicks along the perimeter of the frame.
Upper tray has visible wear in the center from powder cups, but the lower is unused.
Neither were used again after adding the Area 419 tray & cup.
There is yellowing to the top & bottom of the wind screen frame.
I can't cite a situation where I 'needed' the extra scale capacity, but I would order this one again.
Sale includes original double box, manual and both power supplies.
Not loading at this time.
Thanks for looking,
AutoTrickler V2 is stock with the exception of two metal nozzle/inserts.
One extra belt included.
I always loaded ~90% of the charge with a Lee powder cup, so I never had the urge to add any more complication.
Area 419 upgrades include the stand, tray and matching cup.
I personally can't imagine using this set-up without those pieces.
(Base includes adjustable feet, which are very relevant and the cup & tray combo are well thought out)
Here's what I'm thinking for valuation:
FX-300i: $325 ($200 off a new FX-120i, about $400 off a new FX-300i)
AT V2: $50 (Think these were about $220, but there are newer alternatives)
Area 419: $100 ($220 new, now, I don't remember what I paid back then)
$475 face to face
$50 shipping in two boxes due to the Area 419 items (I will refund the difference, if it is somehow less)
Scale purchased from CE in March of 2018.
AutoTrickler V2 purchased new, sometime shortly thereafter.
I went through the set-up instructions one time and then never messed with it again.
Used to load many 1000s of quality test & match rounds, without any issue.
(I plugged everything back in last week and dispensed a couple charges with N160. No change.)
Please see photos for some signs of age & use, mostly minor nicks along the perimeter of the frame.
Upper tray has visible wear in the center from powder cups, but the lower is unused.
Neither were used again after adding the Area 419 tray & cup.
There is yellowing to the top & bottom of the wind screen frame.
I can't cite a situation where I 'needed' the extra scale capacity, but I would order this one again.
Sale includes original double box, manual and both power supplies.
Not loading at this time.
Thanks for looking,
AutoTrickler V2 is stock with the exception of two metal nozzle/inserts.
One extra belt included.
I always loaded ~90% of the charge with a Lee powder cup, so I never had the urge to add any more complication.
Area 419 upgrades include the stand, tray and matching cup.
I personally can't imagine using this set-up without those pieces.
(Base includes adjustable feet, which are very relevant and the cup & tray combo are well thought out)
Here's what I'm thinking for valuation:
FX-300i: $325 ($200 off a new FX-120i, about $400 off a new FX-300i)
AT V2: $50 (Think these were about $220, but there are newer alternatives)
Area 419: $100 ($220 new, now, I don't remember what I paid back then)
$475 face to face
$50 shipping in two boxes due to the Area 419 items (I will refund the difference, if it is somehow less)
