What brand of brass?I have 2-7SAUM's one on a short action,one on a long. 180 berger's, -.020" in the long w/62.2 h1000
gives me 2950 -with single digits. 62.7 4831sc w/162 class projectiles in the short @2995
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What brand of brass?I have 2-7SAUM's one on a short action,one on a long. 180 berger's, -.020" in the long w/62.2 h1000
gives me 2950 -with single digits. 62.7 4831sc w/162 class projectiles in the short @2995
Nosler in the long, Remmy in the shortWhat brand of brass?
Nosler in the long, Remmy in the short
Hey moondog,
What is your opinion of Nosler and Rem. 7mmRSAUM brass???
All the 1000 yard match shooters that I know use Norma brass. They also use H4350. They run them about 2900 or so. Even though they can get more, they say they shot better a little slower. MattThanks very one for the info. I just finished working up 200 pieces of Norma 7mmRSAUM brass and can't wait to start load work-up for my IBS 1000 yds. Light and Heavy BR gun.
All the 1000 yard match shooters that I know use Norma brass. They also use H4350. They run them about 2900 or so. Even though they can get more, they say they shot better a little slower. Matt
I only shot mine at matches a hand full of times. They shot well but I believe your right there might be more accuracy had at the 2900-3000 mark. for long range hunting though I pushed it harder.
I didn't see enough over the .284 to build any more 7SAUM's honestly.
I have run H4350 and RL17 and depending on setups been between 2900 and 3000 all the time. the higher speeds always with the 17 and also coated bullets.I like my 284 Winchester but couldn't get it faster than 2700-2750 FPS without killing the brass and I experienced with all the popular powder( H4831sc,H4350 which shot real will in my gun and IMR 7828ssc) I did try RL 17 @ 2950 with the Berger 180 but that load ruin the brass but shot well.
Couple other shooters at the same club who shot the 284 complained of the same problem and was ruining brass
trying to get more velocity than 2700-2750 FPS.
I have run H4350 and RL17 and depending on setups been between 2900 and 3000 all the time. the higher speeds always with the 17 and also coated bullets.
hi I have been shooting 284 for years try vit 160 54g kvb7 2850 fps 12 reloads lapua brass with 180g Bergers very good use this load in f.class so it has to performI have run H4350 and RL17 and depending on setups been between 2900 and 3000 all the time. the higher speeds always with the 17 and also coated bullets.
I have never had good luck with the Vit powders,hi I have been shooting 284 for years try vit 160 54g kvb7 2850 fps 12 reloads lapua brass with 180g Bergers very good use this load in f.class so it has to perform
If you push a 284 over 2900 the brass will only last two or three reloads befor the primer pockets goI have never had good luck with the Vit powders,
My last .284 really liked 53.8 grains of RL17 with the 180 coated and a Wolf large rifle primer. 2988fps ES was 9 if I remember correct. I have left the 7mm's alone and been playing with mostly 30's and 338's lately though.
Not always. Been there and done itIf you push a 284 over 2900 the brass will only last two or three reloads befor the primer pockets go