7mm mag imr 4831

[Link]

Factory Rem 700 w a 24x Looking for a accuracy load for deer.
The components I have are 150 ballistic tips and IMR 4831.
So I can't use any other info.
I am using once fireformed brass .004 headspace with the bullet at touch. I'm thinking 62 gr powder max or less?
Ideas? ty Don

 

[std7mag]

Factory Rem 700 w a 24x Looking for a accuracy load for deer.
The components I have are 150 ballistic tips and IMR 4831.
So I can't use any other info.
I am using once fireformed brass .004 headspace with the bullet at touch. I'm thinking 62 gr powder max or less?
Ideas? ty Don

IMR 4831 works well in 7mm Rem Mag with the 150gr NBT.

However.....

The stand reply of this works in my gun, your may be different, applies.

There's no short cuts. Do your load work up.

 

[Link]

IMR 4831 works well in 7mm Rem Mag with the 150gr NBT.

However.....

The stand reply of this works in my gun, your may be different, applies.

There's no short cuts. Do your load work up.

I understand completely. Being components and time are in short supply I thought I might get some ideas.
respectfully Don

 

[MikeyJ]

Nosler Reloading Guide #8 lists 61.0-65.0gr IMR 4831 COAL @ 3.290"

 

[Link]

Nosler Reloading Guide #8 lists 61.0-65.0gr IMR 4831 COAL @ 3.290"

I googled and didn't find much, then that worked.
Thanks Don

 

[PhilC]

Nosler's load data is free on-line, same data as the hardback book (have them all back to #1).

 

[topsail86]

62 gr IMR 4831 is very accurate with 150 Ballistic tips in my 7mmRM.