7mm 175 ELD bullet questions

[Texas]

Anyone shooting these? I bought some for my 7/300 WSM. I am trying RL 25 and am getting good velocities but only mediocre accuracy. I have a 9 twist which is slightly slower than recommended. I am seating them about .010 off the lands. Has anyone tried jamming them or loading farther off? I have some Retumbo that I haven't tried so maybe that will yield better results. Using Norma brass and a hunting weight barrel (.670 muzzle) I am getting around 1.75-2 inch groups at 300 yards. Hoping to get consistent half MOA.
Any tips would be appreciated.
Thanks

 

[Lougler]

i've had good luck in my 7 Dakota with H1000 and .025" jump.

 

[hogpatrol]

Reloder 33 works good for me in the 26 Nosler and the 28 Nosler. I'm using it with 130s & 140s in a 1-8 Brux #3 in 26 Nosler and with 168s and 180s in a Brux Sendero 1-9 twist 28 Nosler, all Berger bullets. What are your velocities?

 

[Lougler]

Reloder 33 works good for me in the 26 Nosler and the 28 Nosler. I'm using it with 130s & 140s in a 1-8 Brux #3 in 26 Nosler and with 168s and 180s in a Brux Sendero 1-9 twist 28 Nosler, all Berger bullets. What are your velocities?

3125 with the 175 eld-X

 

[DaveTooley]

Play with the seating depth.

 

[barefooter56]

Anyone shooting these? I bought some for my 7/300 WSM. I am trying RL 25 and am getting good velocities but only mediocre accuracy. I have a 9 twist which is slightly slower than recommended. I am seating them about .010 off the lands. Has anyone tried jamming them or loading farther off? I have some Retumbo that I haven't tried so maybe that will yield better results. Using Norma brass and a hunting weight barrel (.670 muzzle) I am getting around 1.75-2 inch groups at 300 yards. Hoping to get consistent half MOA.
Any tips would be appreciated.
Thanks

Texas,
See Berger Hybrid BULLET seating depth testing information here:
http://bulletin.accurateshooter.com...how-to-load-hybrid-bullets-for-best-accuracy/. General rule of thumb is that once you get to 1 MOA to 1/2 MOA more accuracy can be found by learning to read conditions closer , trigger control and working on your position. It sounds like you have a good load there . Do you have any target pictures or Chronograph information to share ?