SOLD 6XC Savage Small Shank Barrel Package - UrbanRifleman 1-8 26"

[SVT_Tactical]

Decided to go a different direction. Barrel shot 1/2" with several loads but never tried to fine tune to much as other projects took over. In honesty I wanted it to fire the DTACs and it did not like them, had a surplus of them. But 108s were 1/2 or better with first load tried. @Bill Norris did the below target with the gun and the 108s. Shot 112 match burner 1/2" with no effort as well. At 300 put up a 1.380 10shot group with the 112s.


Included with barrel -

• Wilson bushing die (no bushing included) was using .268
• Modified case from 1x fired brass in chamber. Was a factory tubb loaded round before firing and modifying.
• PTG Go Gauge
• 50 New Peterson SRP brass
• 100 1x Peterson srp fired brass, cleaned, ready to run through die and go.
• 50 1x fired Peterson cleaned, sized, and primed with cci450s. They ready to load.
• 48 1x fired LRP Peterson brass - was factory Tubb ammo

Barrel measures 26.5" end to end. 1/8 twist UrbanRifleman 6xc tubb chamber, Threaded 5/8x24. Heavy varmint Profile. 5lb 2oz on postal scale. Estimate around 200 rounds down tube. Cleaned every 10 for first 50 rounds and every 20-30 after that. I did fire 10 rounds before pulling off action but haven't cleaned.




Entire package shipped to you for $550.00.

Brass will be packaged in ziploc bags for transport.

 

[urbanrifleman]

I sent you a PM. Maybe we can do a trade.

 

[SVT_Tactical]

Would you sell the die and go gauge separately

Not at this time.

 

[SVT_Tactical]

TTT

 

[DLT]

I’ll take it all Pm sent

 

[Bill Norris]

Should be a nice project to work with. Good snag.