6XC load info, anyone tried H-4831sc?

[1shot]

Has anyone experimented with H-4831sc in the 6XC using 105-107 gr bullets? A year ago when I started with this project, I followed D. Tubbs published data for H-4350 and even though the results were right on track with what David said, I think there is more to be had from this cartridge. I have already worked up a real hammer of a load using RL-15 driving 105 gr. naked Lapuas 3,150 fps. However, I think a steady diet of this faster burning powder won’t do anything to increase the barrel life, hence the quest for a powder a little slower. I read the article in PS regarding a comparison for 1000yd. cartridges and that info told me that at least two of us are thinking the same way. Any additional information on tested loads would be appreciated. The specs. on what I’m currently shooting are listed below.
Rem.700 action, Broughton 5-C canted land bbl. 28.50” long, 1-8” twist
Lapua non-coated 105 bullets or Hornady 105 A-max, W-W cases, WLR primers
Thanks in advance for all your replies,
1shot

 

[ptf18]

1shot. Did you ever work any loads using H4831SC?

I've got a 6mm/250 and h831sc powder myself. I have always used 4350 with molied SMK 107s but was wondering about the 4831SC

 

[Kurz]

1shot. Did you ever work any loads using H4831SC?

I've got a 6mm/250 and h831sc powder myself. I have always used 4350 with molied SMK 107s but was wondering about the 4831SC

You might want to send him a PM since he posted this 9+ years ago.

Regards.