6x47 Peterson Brass Neck Dimensions?

[alf]

Anybody have Peterson 6x47 Lapua loaded neck diameter dimension?

 

[Gb300wm]

My lot is 0.270” and my Lapua is 0.2695”...

 

[ChrisA]

Timely question, I loaded some new Peterson this morning and found .270" also. I ordered a .268 bushing for my Hornady match grade sizer.

I usually like to FL size new brass but I didn't have a bushing so I picked some cases with a visually round mouth and chamfered them.

Trying to conserve my Varget and H4350, I loaded up a mild charge of CFE223 under 70 gr Blitzkings, and CCI450 primers. I had several hangfires, sooty necks, sooty brass, even after I bumped the charge a grain under max.

So I broke out the H4350 and had very good results.



Chris

 

[Nightraider]

.271" here, verified with calipers not mics

 

[Tucker65]

I have a barrel I'm going to be chambering up for a 6x47 real soon Any idea where a guy can find 100 pieces of this Peterson brass? I have Lapua brass for a varmint rifle I built, but this is going to be for a hunting rifle for my wife and I'd like to keep it separate.

Thanks, John

 

[Tucker65]

Timely question, I loaded some new Peterson this morning and found .270" also. I ordered a .268 bushing for my Hornady match grade sizer.

I usually like to FL size new brass but I didn't have a bushing so I picked some cases with a visually round mouth and chamfered them.

Trying to conserve my Varget and H4350, I loaded up a mild charge of CFE223 under 70 gr Blitzkings, and CCI450 primers. I had several hangfires, sooty necks, sooty brass, even after I bumped the charge a grain under max.

So I broke out the H4350 and had very good results.



Chris

I used 43.5gr of Reloader 17 pushing a 70gr Blitzking and had great results.

 

[Stickler]

I have a barrel I'm going to be chambering up for a 6x47 real soon Any idea where a guy can find 100 pieces of this Peterson brass? I have Lapua brass for a varmint rifle I built but this is going to be for a hunting rifle for my wife and I'd like to keep it separate.

Thanks, John

https://www.petersoncartridge.com/m...fle-casings/6x47-lapua-brass-cartridge-cases/

 

[Tucker65]

https://www.petersoncartridge.com/m...fle-casings/6x47-lapua-brass-cartridge-cases/

Thanks, I know Graf's is the only supplier selling it for Peterson's. They have been out of stock forever on it and I was hoping someone maybe purchased extra when they had it and would be willing to part with a 100.

Thanks, John

 

[Kracken McGraw]

I noticed Graf’s has Peterson 6x47L in stock this morning.
@Tucker65