6x47 lapua Start loads

[Jase PTRC]

Hi all, im looking for a safe start load for 6x47 Lapua using H4350 and Berger 105gr Hybrids. Im posting for a friend who isnt finding much luck getting good info.

 

[wapiti25]

buy the Berger reloading manual

 

[jakelly]

There is a thread in the 6-6.5x47 subforum that should answer some of his questions.

 

[Milo 2.0]

buy the Berger reloading manual

Not in the Berger manual.
Start at 37gr or so and work up.

 

[22DASHER]

+1 on starting at 37

 

[lbran]

Hi all, im looking for a safe start load for 6x47 Lapua using H4350 and Berger 105gr Hybrids. Im posting for a friend who isnt finding much luck getting good info.

yeah, 37gr and work up!!! I was shooting 39

 

[wapiti25]

My Berger manual show's IMR 4350 and AA 4350 at 33.5 and 34 as starting load for 105/108 gr

 

[fourpower]

Hi all, im looking for a safe start load for 6x47 Lapua using H4350 and Berger 105gr Hybrids. Im posting for a friend who isnt finding much luck getting good info.

use mag primers and start at 38gr h-4350. on my new gun I now use 40gr for 3100fps.

 

[barefooter56]

Hi all, im looking for a safe start load for 6x47 Lapua using H4350 and Berger 105gr Hybrids. Im posting for a friend who isnt finding much luck getting good info.

Jase PRTC,
Please contact BOB who does our load work up here : techsupport@bergerbullets.com . Let him know what you need and he will get back with you ASAP. Do not use IMR4350 load data for H4350. For our HYBRID bullets see seating depth testing information here :
http://bulletin.accurateshooter.com...how-to-load-hybrid-bullets-for-best-accuracy/ . I suggest you find your seating depth accuracy node first using the lowest powder charge listed for the bullet/powder/cartridge combination you are testing. Once the seating depth accuracy node is found. Work your load back up slowly checking for pressure signs and accuracy until you find your highest velocity accuracy node. If you have any more questions please contact us here or at techsupport@bergerbullets.com
Take care,

 

[gotcha]

Now, that's what I call service!

 

[Jase PTRC]

Jase PRTC,
Please contact BOB who does our load work up here : techsupport@bergerbullets.com . Let him know what you need and he will get back with you ASAP. Do not use IMR4350 load data for H4350. For our HYBRID bullets see seating depth testing information here :
http://bulletin.accurateshooter.com...how-to-load-hybrid-bullets-for-best-accuracy/ . I suggest you find your seating depth accuracy node first using the lowest powder charge listed for the bullet/powder/cartridge combination you are testing. Once the seating depth accuracy node is found. Work your load back up slowly checking for pressure signs and accuracy until you find your highest velocity accuracy node. If you have any more questions please contact us here or at techsupport@bergerbullets.com
Take care,

I have passed on your details to my buddy. Surprised and impressed with this reply and the offer of help on the behalf of yourself and Berger Bullets. Thanks very much Phil.