Question for those loading the 6x47 Lapua.
Let them alone? Clean them up? Open them up?
Let them alone? Clean them up? Open them up?
6x47 Lapua flashholes
- Thread starter steveyrock
- Start date
Forum Boss
Administrator
Normally we suggest leaving Lapua small flash-holes alone. However, with some recent lots of the 6.5x47 brass we have noted some unwanted thin slivers of brass impinging on the flash-hole.
We have brought this to Lapua's attention and they are improving the QC. However, you should inspect your brass and deburr the flash-holes as necessary. Use a PPC tool so as to not increase the diameter of the hole.
We have brought this to Lapua's attention and they are improving the QC. However, you should inspect your brass and deburr the flash-holes as necessary. Use a PPC tool so as to not increase the diameter of the hole.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.