6X45 (6X223) DATA

[bsekf]

I had a 2-3 page print off of 6X45 reloading data. I saved it somewhere and can't find it. Anybody got a copy? It had every powder and bullet combination imaginable.

 

[GLShooter]

I've got an 18 pager of data. Send me an email. Glshooter@aol.com

 

[Jim Mc]

just sent you a PDF check your PM's

 

[JB10]

Also Hodgdon has it on their website

 

[Panzer22]

Here you go

 

[JEFFPPC]

W748 with 60 Sierra HP was the answer for me. I should add.....lots of 748.

 

[bsekf]

Thank you all! I found the file I had it saved in, all 13 pages. It was carefully saved in a file I wouldn't forget, HA!

 

[Bill K]

How many of us have done the same, saved where we will not forget, ya right.. Ha.

Thank you all! I found the file I had it saved in, all 13 pages. It was carefully saved in a file I wouldn't forget, HA!

 

[StumpGrinder]

I've got an 18 pager of data. Send me an email. Glshooter@aol.com

I'm trying to work up a load for a bolt action for 95 and 100 grain SSTs and 80 grain ttsx that will approach 60k. I've tried Tac and CFE 223 and can not physically get any more powder into the case and still seat the bullets. Do you know a powder with less bulk that would let me get another grain or so of powder in the case with room for the bullet. I tried the Gordon's Tool app but couldn't get it to work. I want to try Accurate 11fs because I have 8 pounds of it and it works well in 458 SOCOM, 7.62x39, 300 blk and 44mag. It is supposed to be the same as Power Pro 3000 MP with a flash suppressant. I want something that will give me 100% burn, with maximum velocities around 3000 fps and stay under 58k to 60k. Just like Hornady has done with their 6arc bolt action data. Anyone who can make the Gordon Tool work and would run this for me I would appreciate it. Thanks

 

[StumpGrinder]

I've got an 18 pager of data. Send me an email. Glshooter@aol.com

Also, as a side note, I'm using CCI 41 primers and so far there have been absolutely no pressure signs. Primer edges still rounded, no cratering at the fire pin and cases extract easily.

 

[BobT]

I’m not much help, my 6x45 has a 14 twist barrel so the longer bullets won’t stabilize. I have used Ramshot X-terminator with good success. Those CCI #41s are fairly hard in my experience so I would be careful using them as a pressure indicator.