6PPC Small Base / Ring Die Substitute

[Silo1616]

What pistol die works as a substitute for a 6PPC small base / ring die? It's been posted discussed here but I can't find it.

I need to size the .200" line on some old brass and a Harrol's #3.5 or Redding small base dies I have won't do it without setting back the shoulder too far.

Thanks

 

[GLShooter]

Buy a small base Grendel die and it won't touch the shoulder.

Greg

 

[DHD]

Take a look at the Sergeant of Arms belt buster die. 6.5 Grendel, 6mm ARC, and no doubt the PPC. It sizes only the .200" line and below.

I had been on the look out for something like it for a long while as I have a lot of once fired AA 6.5 Grendel brass (bought from Les Baer when they were developing the LBC) that would not fit the chamber of a Proof barrel. Whelp, that did it. I have used it as a push through die but make sure the cases are well lubed with something besides OneShot if you do.

 

[Lucky Shooter]

A long time ago I tried a Lee carbide ring die-----41 Mag as I recall. Check the numbers.

Corrected----spike-55 is correct. My bad.

I found the die and it is truly 41 MAG.

Thank you spike.


A. Weldy

 

[spike-55]

.41mag should be your answer???
stan
or a Harrels #4