6mmBR Cartridge Boxes

[RichardNott]

Have tried many different cartridge boxes for the 6mmBR with no joy. Usually the box is too deep and you can't get a grip on the next cartridge, especially if it is a molied bullet. I finally came across a box made by JandJ products that doesn't need foam help for spacing, www.jandjproducts.com ) that seems to fill the bill. The lower portion of the box is short enough to get a grip on the cartridges. The top of the box has been left with the room taken out of the bottom for those extra long seated bullets. I found these at midsouth shooters supply on sale for under $3 but the shipping seemed to be high. Maybe they can be found somewhere else on the websites.
Just wanting to pass it along
Richard

 

[Bob3700]

Thanks for the tip on the 6mm BR cartridge boxes.

Those are for 100 rds, know of any source for a 50 rd box

Bob

 

[alf]

MTM's RS-S-50 are for the BR sized cases.

It's about a half inch shorter than the 308 sized one and holds 50 rounds.

 

[janderson0]

For 50 rounds I like these:

Click Here


Jim

 

[243Mendoza]

The 100round J&J boxes are great except when your 105/107gr bullets are seated a little higher when your throats wears.

 

[js223]

steve, what COL would you consider max for those 100 round boxes?
There is no info on the website about that.

 

[243Mendoza]

steve, what COL would you consider max for those 100 round boxes?
There is no info on the website about that.

I don't know and I'm not sure I ever recorded the length of the cartridge since I only measure to the ogive. I guess one estimate is to measure the box height from the outside and subtract the thickness.

 

[js223]

gunamonth, thank you for the info. It looks like they won't work for a long freebore barrel with the 105s.

 

[alf]

Midway's is 2.470 max also.

 

[JBR]

I have been using 50 round box by Plano, available at Bass Pro-Shops and Cabella. It does need a piece of foam inserted in the top to keep things in order but is still nice. It has a real hinge for the top instead of the solid plastic piece so the top stays out of the way at the bench.

 

[P1ZombieKiller]

I have been using 50 round box by Plano, available at Bass Pro-Shops and Cabella. It does need a piece of foam inserted in the top to keep things in order but is still nice. It has a real hinge for the top instead of the solid plastic piece so the top stays out of the way at the bench.

Which box? got a model number?

 

[JBR]

The Plano box says Model 1212 on the bottom. It also says 'Holds 22/250, 30/30, 308 & Others'. It measures approximately 6' wide X 3 1/8' High X 3 1/4' Deep.

 

[Dave Zander]

 

[fkimble@charter.net]

I just use a slip top 50 round 45acp type box .A good rubber band makes them spill proof.

Frank

 

[DogBuster]

Lapua Blue box from your 6BR brass ?

Come with dividers

 

[Perk]

I use a 1/2 inch piece of dowel rod in the bottom of box. If I need longer dumb them out. Perk

Hi Richard long time no see at the range.

 

[divingin]

MTM's RS-S-50 are for the BR sized cases.

It's about a half inch shorter than the 308 sized one and holds 50 rounds.

Those are what I use. They fit my 6BR ammo loaded with 105/108/109 Bergers loaded to .020 over jam without interference (can't go much longer than that - not sure why I'd need to, though, either.)

 

[makurtz]

Lapua Blue box from your 6BR brass ?

Come with dividers

Works Great!

 

[dickn52]

View attachment 1347411

I use these for everything I shoot now. Extremely well built, and now he can offer a groove in the sides of the boxes for easier access.

 

[Nick Caprinolo]

https://www.amazon.com/dp/B07796G29W?ref=ppx_yo2ov_dt_b_product_details&th=1

Only $4.99 a box and works perfectly.