6MMAI load data request

[Mr.Spradlin]

Folks I picked up a Remington 700 LA built 6MMAI with a 10 twist Krieger barrel .267 neck. I was wondering if anyone had recomendations for loads. I will be using this for paper punching and ringing steel at 600 yards.
Thanks folks
Matt

 

[40X Guy]

87 grain Hornady V-Max is perfect for a 10 twist. You'll get the best combo of speed, decent BC, and accuracy with that weight class of bullets. Powders to try would be H4831SC, RL-22, and N160. There are quite a few members here who run 6AI's who will probably chime in with more load and component data.

Frank

 

[WyleWD]

87 grain Hornady V-Max is perfect for a 10 twist. You'll get the best combo of speed, decent BC, and accuracy with that weight class of bullets. Powders to try would be H4831SC, RL-22, and N160. There are quite a few members here who run 6AI's who will probably chime in with more load and component data.

Frank

+1 on Frank's post.... N550 and N560 also worked well with the 87gr Vmax in mine. WD

 

[Mr.Spradlin]

Thanks for the info folks
Matt

 

[AckleymanII]

PM sent