6mm creedmoor brass

[JB10]

Im looking for some 6mm creedmoor brass for a new rifle. For my other rifle i bought ADG and its been fine but maybe have 150 rounds down the barrel so i can not account for how goot the brass is. I do not care to push the loads hard. I am also only interested in large primer brass. My question is do i go with Peterson brass or wait for ADG brass that ive been told might be released in January? I did contact ADG and they said should be out then if things dont change and i have a back order for it through a vendor. Another thought i had was neck down 6.5cm Lapua to 6mm. For you that is running the peterson LP how is the brass? Im sure the Lapua would be good quality also. Or just wait for the ADG.

 

[memilanuk]

I went with 300 pieces of Peterson LRP brass for a 6CM barrel earlier this year. Seems to be working well... but I've only got maybe 2 firings on the whole batch.

 

[JB10]

Must not be many people shooting the 6cm anymore i guess.

 

[DLT]

Must not be many people shooting the 6cm anymore i guess.

I been waiting on them to release 6 creed for I’m guessing 3 years. I went through 100 pieces when adg first came out with it. No way it’s much better than Peterson if any at all.

 

[JB10]

I been waiting on them to release 6 creed for I’m guessing 3 years. I went through 100 pieces when adg first came out with it. No way it’s much better than Peterson if any at all.

Well it possibly will be out December to January i was told.

 

[Rob01]

I use Hornady in my 6 Creeds and it works great.

 

[SVT_Tactical]

I use lapua. No reason to try anything else.

 

[JB10]

I use lapua. No reason to try anything else.

Is you lapua necked down or did you get some when they still made the 6cm brass?

 

[DLT]

I don’t think lapua ever made large primer 6 creedmoor brass.

 

[JB10]

I don’t think lapua ever made large primer 6 creedmoor brass.

Correct. It was all srp brass. But sometimes guys respond about eather or primer sized brass.

 

[SVT_Tactical]

All mine are from factory loaded berger 6cm.

 

[Kracken McGraw]

Why not Starline brass?https://www.starlinebrass.com/6mm-creedmoor

 

[DLT]

Why not Starline brass?https://www.starlinebrass.com/6mm-creedmoor

There is a good option. Sig sauer makes brass too just not sure on the primer size. I think it’s large

 

[spudgun]

I just necked down my Starline 6.5 Creed to 6 creed. Been using the same brass for 4 years now.