6dasher alpha brass

[kawsam62s]

Hello good afternoon
Can 6 mm alpha Dasher brass be used in a non Legacy Reamer chamber?

 

[Texas Solo]

Yes. My chamber, cut by Shillen, was done with a PTG reamer.
.272 neck, .104 FB.
No turn Alpha brass works perfect.

 

[JFrank]

I use a reamer from PTG as well.
WRH Dasher
.2719 NK
104 FB
Alpha brass
Wilson FL bushing die
105 gr vld
Varget 32.5 gr

 

[skeetlee]

you will have to trim the brass if the reamer was made for lapua

 

[JFrank]

you will have to trim the brass if the reamer was made for lapua

That’s a great point, I’m glad you brought that up.
Being a BRA guy firstly I have my trimmer preset at 1.550 for a 1.570 chamber. I’ll have to keep my eye on that.

Jim