• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6br reamer ?

I am looking to chamber a 6br 1-14 twist to shoot 58g v-maxes does any body have any suggestions on what reamer specs should be. Thanks
 
Not sure what your loaded neck diameter will be.....or if you are turning necks.

I have a 6 Dasher

0 free bore,

1.5* lead,

.269 neck that i will be using next week to chamber a barrel to launch 55 noslers and the like.....

If you are looking to buy a reamer call Dave Kiff and tell him what you want your rifle to do,he will steer you in the right direction.
 
I have a PTG 6 br reamer that has been used three times, it is .2704 neck, 1.5 degree with .60 freebore. They all love the lighter bullets with about 1.685 to the ogive. and it will shoot 95 grains extremely well. have it on a 10 twist, 11 twist and 8 twist. all are super. No turn blue box lapua with .2675 loaded. Also have a 14 twist with no freebore in a 272 neck. works well to 75 gr Sierra, but love 70 gr Sierra balistic tip. If I were going with a 14 twist go 0 or very little freebore, you will have plenty to chase later.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,969
Messages
2,207,718
Members
79,262
Latest member
Westcoast308
Back
Top