6br reamer print

[theduck]

Can anybody supply me a accurate reamer print for the 6mmbr lapua?
I need a good print so i can draw up the reamer on my CNC software and chamber my new barrel on the CNC horizontal mill.

Many thanks

Mike

 

[theduck]

Great thanks for the print.
269 neck is what i was looking for but did you have bad results with it?

Many thanks

Mike

 

[shcal]

I've got a PT&G reamer with a .272 neck and a .085 freebore. When I ordered it form PT&G they advised on the "No Turn" neck and I'm glad I did, it is very accurate and I don't have to turn brass. However I personally have nothing to compare it to.
shcal

 

[Preacher]

269 neck is what i was looking for but did you have bad results with it?

Not at all. The rifle shot like a dream for over a thousand rounds. Turning necks just isn't my idea of time well spent. I just picked up my original 6mmBR rifle today from having the barrel set back 0.400" and rechambered with a reamer from Kiff ground to the same specs with a 0.271" neck.

I've heard stories that 0.271" may be too tight for some Lapua brass but I have 2,000 new cases from two different lots that I've measured the neck wall thickness on and they're 0.0133" to 0.0139" so I think I can shoot out enough barrels to cover the reamer cost.

I could make you a good deal on the reamer in the print. Only used once......

You have mail .......

 

[theduck]

I have just received my match reamer from Midway, the one that Dave KIff suggests in his article with a .272 neck and a free bore for the 107g.,#555174)
when i checked the free bore it was about .050 ?? and midway don't do a return on reamers!
I'm checking the free bore from the end of the 45 deg to the start of the 1.5 deg throat area and that flat land measures about .050.
Maybe I'm measuring it incorrectly.
ohh yes I'm using Shadow graph comparator to check the dimensions.
Does any body have a reamer for sale for the 105-107g any neck diameter.

many thanks
Mike