6BR load for 90 Lapua Scenar?

[chazgreen]

1:9 Kreiger, trued Rem SA, no turn neck. I have H4895, Varget, and RL15 on hand; Bell & Carlson Medalist stock, Bushnell 4200 8-32x scope,Rifle Basix triger, Lapua brass. Cannot get better than 1 1/2 inch 4 shot groups at 200 yds. Does anyone out there have any pet loads that will help me out? Thanks, Chaz.

 

[chazgreen]

Sure do wish someone out there would help out a newbe.......Also,any thoughts on a load for the new Sierra 95 SMK? I called Siera today & they say it will NOT stabilize in my 1:9 Kreiger. Thanks/ Chaz

 

[chazgreen]

Gunamounth/ thanks so much; this will be a good starting point for me/ Chaz

 

[paulT]

Gunamounth/ thanks so much; this will be a good starting point for me/ Chaz

Hello gunamounth, Do you shoot molly bullets with your quoted 6mm load? also with your light neck tension can the bullets be pushed into case by hand? i am looking to develope a load with the berger molly 105g VLDs Lapua 243 brass ccibr and vit n560, think i red somewhere that molly bullets require moderate neck tension which yields best accuracy have you any info on this, thanks paul.

 

[paulT]

Hello Gunamounth, Yea i should have mentioned that i was using n560 for my 1 in 8 twist 243 allong with the 105g berger molly vlds, do you neck size all of the neck with your bushing dies, paul.