Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
There was a pretty good thread on this a few years ago.Im just looking for other options with powder that i already have . I have about 4lbs of varget left and have 10lbs of H-4350. So i would like some load data and exspected fps with 4350 and a 105 . My barrel is 28" long . I just started looking for more varget with no luck so far
the GRT does not have that powder in the data base, i know where 8 8lb jugs of it are sitting.. would you PM me your load data please.. thanksI shoot AA2495 in my BRA with a 105 class bullet and it does great and not bothered by temperature very much either. Dont over look it.
Let me get home from work and I’ll send you pictures of all the load work i have done with it from my 6BRA load bookthe GRT does not have that powder in the data base, i know where 8 8lb jugs of it are sitting.. would you PM me your load data please.. thanks
ThanksLet me get home from work and I’ll send you pictures of all the load work i have done with it from my 6BRA load book
Certainly is prudent to work up to that.Imo 33.5 of h4350 would be hot for a 6BR. If you could get it in the 6br case. I shot 33.9 last weekend in a 6bra at over 3000fps.
Is there a accuracy improvement over a powder like H4895? Just curious because I was wanting to try some Accurate 4350.Hi being using 34 grains H4350 in my br for a while long drop tube no pressure signs running out of 26” barrel 2880ish with 108 bt Berger
H-4895 worked O K for me but I found better accuracy with Varget and the likes.Is there a accuracy improvement over a powder like H4895? Just curious because I was wanting to try some Accurate 4350.
That’s good to know too. Thanks.H-4895 worked O K for me but I found better accuracy with Varget and the likes.
Hi I did not have anything else to try but I’m starting to use N150 results so far are looking goodIs there an accuracy improvement over a powder like H4895? Just curious because I was wanting to try some Accurate 4350.
AA4350 is even slower than H or IMR 4350.Is there a accuracy improvement over a powder like H4895? Just curious because I was wanting to try some Accurate 4350.
Yes, I was just wanting to try it sometime because I stocked up on it for around $30 a pound. Sierra’s new manual shows loadings for those type powders for the 6br, and they show to get more speed than the 4895 types.AA4350 is even slower than H or IMR 4350.
