6BR/105 amax/Reloader 15???

[snert]

I did a little research on the 6BR load data page and via the online load data pages, but was looking for real world experince with the following:

6BR (not dasher etc)
105 AMAX
Reloader 15
Varget
mag or standard primer.

Looking for what your load was, and your thoughts. I have all the componants, looking for advice on Reloader 15 especially, since Varget is on the 6BR page.

 

[Terry]

30.2gr.

You gun may differ.

 

[22DASHER]

http://forum.accurateshooter.com/index.php?topic=157788.0

 

[Longtrain]

30 grains Norma 203B (Close if not the same as RE-15), 105 Nosler, Rem 7 1/2. Fire forming load for Dasher, stupid thing hammers.

 

[snert]

Thanks guys...I was starting too low...wondering why it seemed SLOW!

snert

 

[Ghansen]

29.8 of RL15 with Berger 105's ATL, CCI450 primers in Lapua. Groups sub .3 @100 first time out.

 

[ShootDots]

Thanks guys...I was starting too low...wondering why it seemed SLOW!

snert

Snert, I have not shot the A-Max's, however, I had shot just about every other 105gr pill. If you want VELOCITY in your 6BR AND the prospect of GREAT accuracy, give VV N540 a shot. I was using it when Berger first came out with their 108 B/T.. It was VERY accurate (5 shots consistently inside 3/4" at 300 yards under good weather) and I was running in the vicinity of 2880! My load was 30.6grs using CCI BR-4's.. Sadly after I ran low, the shortage hit and I could not get either the 108's and did not see N540 for 2 years!

 

[elk3]

Var. 30.2 To 30.5 Excellent. Work your way up ALWAYS
Good Luck

 

[cjrowe]

30.5gr RE-15 or 30.0gr Varget
105gr Amax or BTHP
CCI450
Lapua brass

 

[noload]

RL 15, 29.8 ( give or take 2 tenths), just touch the lands with Amax, or better yet same thing with the Berger 105 VLDs. Prime with CCI br 4s.