SuzukiRider987
Silver $$ Contributor
Looking to move a rifle I built and never fully got into using it like I intended to. Full specs below, but any questions please ask.
Looking to sell as a package, so not interested in parting out. Dies and barrel were purchased thru Accurate and Reliable Rifle. All new parts were used to assemble rifle.
Lower Specs:
- Wilson Combat billet lower
- Assembled with Wilson Combat lower parts kit
- Triggertech Diamond flat trigger
- MKM precision vertical grip
- Magpul PRS gen 3 stock
- Sprinco red spring with H1 buffer
Upper Specs:
- Krieger 24" 8 twist barrel, 5/8x24 threads; 195 documented rounds on it.
- Aero Precision enhanced upper and 15" rail (no forward assist)
- Superlative clamp-on adjustable gas block
- JP enhanced 6.5 grendel bolt in a Wilson Combat chrome carrier
Package also includes:
- Whidden full length sizer and micrometer seater dies
- Modified case
- Brass in various states of firing
- 40 unfired Lapua; sized and ready to load
- 11 once fired Lapua
- 33 once fired Hornady
- 24 twice fired Starline
- 19 once fired, processed/primed and ready to load Starline
- 10 round ASC mag (front has been windowed to along longer seating)
*Scope, mount, bipod, arca rail, and loading trays in the pictures are not included.
Rifle shoots great, and gas system is well tuned with the sprinco red spring. I only shot 105 Berger boat tails thru it, and it will shoot 1/2" to 3/4" 5 shot groups at 100 consistently, with some better than that. Was using CFE223 and pushing the 105's around 2800.
Asking $1700 for the entire package shipped to your FFL in the lower 48, no ban states. They must accept from individuals.
Looking to sell as a package, so not interested in parting out. Dies and barrel were purchased thru Accurate and Reliable Rifle. All new parts were used to assemble rifle.
Lower Specs:
- Wilson Combat billet lower
- Assembled with Wilson Combat lower parts kit
- Triggertech Diamond flat trigger
- MKM precision vertical grip
- Magpul PRS gen 3 stock
- Sprinco red spring with H1 buffer
Upper Specs:
- Krieger 24" 8 twist barrel, 5/8x24 threads; 195 documented rounds on it.
- Aero Precision enhanced upper and 15" rail (no forward assist)
- Superlative clamp-on adjustable gas block
- JP enhanced 6.5 grendel bolt in a Wilson Combat chrome carrier
Package also includes:
- Whidden full length sizer and micrometer seater dies
- Modified case
- Brass in various states of firing
- 40 unfired Lapua; sized and ready to load
- 11 once fired Lapua
- 33 once fired Hornady
- 24 twice fired Starline
- 19 once fired, processed/primed and ready to load Starline
- 10 round ASC mag (front has been windowed to along longer seating)
*Scope, mount, bipod, arca rail, and loading trays in the pictures are not included.
Rifle shoots great, and gas system is well tuned with the sprinco red spring. I only shot 105 Berger boat tails thru it, and it will shoot 1/2" to 3/4" 5 shot groups at 100 consistently, with some better than that. Was using CFE223 and pushing the 105's around 2800.
Asking $1700 for the entire package shipped to your FFL in the lower 48, no ban states. They must accept from individuals.
