I've been doing some reading on an extremely accurate round for out to 1000 yards and it seems the Dasher is the one always showing up near the top. I'm more of a prone shooter than BR. I can run a rifle well and have a 6.5 Saum and 338 Lapua that are very accurate. Both are tactical builds.
So, I want a 6 Dasher in a tactical build (mcmillan A5, badger DBM, etc.) but was wondering what can be expected if these are made in a magazine fed rifle? To be honest, I would likely single feed it most of the time, but would like a magazine to feed from sometimes.
I've read some had great success modifying a 223 AI mag to get a 5 rd Dasher or BR magazine. Just wanted to put this up here to get some first hand accounts. Not sure on the builder yet, thinking GA Precision or LA precision (wnroscoe)
Brass prep is not an issue, as this would just be a gun to tinker around with and hopefully turn out some very small groups with good barrel life.
105 hybrids, 108 BT style bullets would be used. .268 neck, .135 FB sound about right?
Thanks for any guidance
Alan
So, I want a 6 Dasher in a tactical build (mcmillan A5, badger DBM, etc.) but was wondering what can be expected if these are made in a magazine fed rifle? To be honest, I would likely single feed it most of the time, but would like a magazine to feed from sometimes.
I've read some had great success modifying a 223 AI mag to get a 5 rd Dasher or BR magazine. Just wanted to put this up here to get some first hand accounts. Not sure on the builder yet, thinking GA Precision or LA precision (wnroscoe)
Brass prep is not an issue, as this would just be a gun to tinker around with and hopefully turn out some very small groups with good barrel life.
105 hybrids, 108 BT style bullets would be used. .268 neck, .135 FB sound about right?
Thanks for any guidance
Alan