6 Dasher 1:7 - 115 dtach - what powder?

[Ryan55555]

What powder are you guys using with the dtac's? I have some Varget and RL15 to use, wondering if something slower might work better with these heavier bullets.

 

[JBT47]

H4350. RL16 if you can get enough in the case.

 

[uashooter]

I am currently working with RL-26 for 115 DTAC BN RBTs in a 6XC, has potential. There is a jug of H4350 in the cabinet, too, tho.

 

[urbanrifleman]

I would try n150.

 

[kyreloader]

I would try 4451, similar burn rate to H4350 but about 1 grain less in my 6.5x47.

 

[SteveOak]

I have a 6BR so not quite the same and an 8 twist barrel so not quite the same either.

I do shoot the DTAC 115s and use VV N150 but I tend to try to match powder to load conditions, cartridge, bullet weight, twist, and target velocity more than most do. Faster twist = slower powder. Heavier bullet = slower powder.

You might even try N550 if you are looking for a little more velocity. It is also a bit slower than N150.

I tried Varget and didn't like the recoil impulse.