• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6 Creedmoor data 115 DTAC RBT

looking for load data for my rifle. I am using the following components:

Hornady Brass 6 Creedmoor
Primer is BR-2
Tubbs 115 DTAC RBT
Powder is H4350

Bartlein Barrel 1 / 7.5 twist at 26”
Surgeon Action
KMW Stock
 
With the old 115 DTAC not rbt my accuracy load was 40.6 gr H4350 with BR2 Primer OAL 2.790 3017fps. My reamer has a .104 throat. I understand it isn't the same bullet but thought the info may help.
 
A stout load of H4350 seems to work well in all of these mid sized 6mms, with bullets from 105-115. I’ve had luck pushing them hard in a 30” barrel.
 
Never. I have a new comp match barrel ready to screw on. I just have to have a Creedmoor.

I keep thinking I would like a Dasher or a Creed, but I am so happy with my Comp Match there is not reason for needing to change. And everyone knows change is bad.
 
The December issue of Handloader magazine has loads for 6 Creedmoor for hunting. Their powder charge was 42.0gr IMR 4955 for 2850 with a 115 Berger VLD hunting bullet in Hornady cases with a CCI200. The group size from a Ruger American Rifle Predator with an 8 twist was .90. Better results were with 41.5 gr H4350 and a 105 Berger VLD hunting.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,331
Messages
2,216,451
Members
79,555
Latest member
GerSteve
Back
Top