6 BRX, 8 tw and norma 203B?

[lpreddick]

just got some 203B and will try it in my 6 BRX. any tried and true loads appreciated, and i'll start lower. thanks.

 

[bdale]

I run 30.2 to 30.4 in a straight BR don't see why you couldn't start with that, I also shoot the 105 VLD's. I've been told that it's same powder as RL15 but I don't think so. I think it has been massaged a little to make it a little more consistent , larger accuracy node.

 

[NateG]

I've used that exact combination to good effect with 105 Berger VLDs (original ones, early target jackets before the meplat change, and current hunting jackets). Also, with multiple barrels, I've been jumping a long way. .085" in the first barrel, a bit less with another, and back to .085 with the current one.

I ended up in the 32.X range, and a bit over 3000fps. 3050 with a 32" tube, more like 3020 with a 30".

 

[savagedasher]

I need more information Bullet Water capacity oal length of loaded round barrel length. then I will give you some help. Good Shooting Larry

 

[Chuckhunter]

lpreddick I had similar results to Nate G. I have a 28" Kreiger 8twist .237 bore, .104 free-bore barrel so I couldn't seat way off the rifling. I started at .025 off and worked to .010 in. My best load to date is 32.7Gr's. N-203-B, .010 jump shooting 105 Berger Hybrids, coated with Danzac. Average M.V=2980, E,S.=9 and S,D,=4 This is from a Dasher but at least it should give you an idea. If you are shooting naked bullets, I would reduce load by at least a grain and a half and work back up slowly. Hope this helps a little.