"6 BRBS and 6 BRDX"

[SHootSTraight22]

Can someone please post up the case measurements for these two cases... Also between the 6 Dasher, 6 BRX, 6 BRDX, and 6 BRBS which case do you think is the most efficient and accurate?? What problems have been found with any of these cases... I'm trying to decide which neck/shoulder dimension to experiment with for a larger case 6mm cartridge.. Thank You...

 

[mr45man]

Have you checked here
http://www.6mmbr.com/6brimproved01.html

 

[Scott Harris]

Dasher, 6BRX, 6BRDX....all about the same velocity, accuracy, case life. It's 3 different flavors of the same thing. Dasher is most popular and has the widest selection of factory dies. BRDX is a custom die affair.

 

[SHootSTraight22]

Have you checked here
http://www.6mmbr.com/6brimproved01.html

Thanks, yes that's where I looked first about these cases...

 

[SHootSTraight22]

I'm thinking about choosing the 6mmBRBS because of the extra case capacity it will give me.. Remember I'm forming this neck/shoulder onto a 6-6.5x47L case for a high pressure 6mm cartridge shooting 105gr hybrids hopefully around 3,250fps accurately.. That's my goal and also a easier to tune cartridge than the standard 6-6.5x47L case has been known to be.. Which neck/shoulder design would yall be interested in trying regarding this wildcat design?? Scott@Liberty did the Dasherized version and says it fixed all the tuning problems experienced with the parent 6-6.5x47L case.. I've seen the 6mmSMACK which is a Dasherized version as well and the guy got 3,300fps out of it with 105gr bullets so I figured a 6mmBRBS version would be neat to try since the small 6mm bullet doesn't need much neck to secure it while using .003-.004 neck tension.. Does anyone know the neck length of the 6BRBS case??? Thanks..