6.5X55AI FL die

[AckleyImproved]

Hi

Have posted this question else where, but I really need some ideas from people about a FL die for a swede improved.

I understand that the custom might be the way, but who knows.. someone out there might just have one lying around!!

People that shoot the swede improved.. what FL die are you using?

Cheers
AI

 

[DesertLefty]

I have a full-length sizer die and Wilson-type seater die for a 6.5 Vais, which is an improved 6.5x55, but maybe not the one you're looking for.

If you haven't already chambered your rifle, you could consider this option. I was VERY pleased with the performance and accuracy of my 6.5 Vais. It gave the performance of a 6.5-284 with 5 gr less powder. I've switched to 6.5x47 only because I want a cartridge that will fit in a short-action magazine box. PM me if you're interested,$40+shipping for both dies).

 

[dunwerkin]

Ackley Improved
I have a 2 die set for the 6.5x55 B J Ackley Improved 40 degree shoulder. It is an RCBS. It is in like new condition. I will sell it for half the cost of a new set. Contact me at jrl01936 Or 1-814 -772-1220 and leave message or on the forum. Thanks. I also have a reamer by Dave Kiff of PTG in that caliber. Used once.

AMF

JIM

 

[dunwerkin]

Ackley Improved
I have an RCBS 2 die set for the B J Ackley improved 40 degree shoulder. Also a chamber reamer for the same caliber By Dave Kiff of PTG I will sell both for half the cost of present prices. I can be reached at jrl01936@yahoo.com or 1-814-772-1220. Leave message. Or on this forum. thanks.

AMF

JIM

 

[AckleyImproved]

Thanks for the offer on the die and reamer, but not to long after posting, I found a nice set up involving a custom FL bushing die and reamer to suit.

Cheers
AI

 

[guns_and_labs]

Ackley Improved
I have an RCBS 2 die set for the B J Ackley improved 40 degree shoulder. Also a chamber reamer for the same caliber By Dave Kiff of PTG I will sell both for half the cost of present prices. I can be reached at jrl01936@yahoo.com or 1-814-772-1220. Leave message. Or on this forum. thanks.

AMF

JIM

I'd be interested. Email sent.