WANTED 6.5x47 modified case
- Thread starter potatoe
- Start date
MikeRu
Gold $$ Contributor
If desired you can make one with these instructions using a once fired case, so it’s fire formed to nicely match your chamber. A drill press works fine for me with visual alignment, and as noted by Gavin a little runout won’t hurt your measurements:
bulletin.accurateshooter.com
You can order the size M drill bit and the 5/16x36 TPI tap from Amazon or elsewhere, about $9 each. One purchase works for all your calibers.
How to Make a Modified Case for Measuring Length-to-Lands « Daily Bulletin
Our friend Gavin Gear has just released an excellent video showing how to make a threaded Modified Case for use with the Hornady Lock-N-Load Overall Length Gauge. You can watch Gavin make a Modified Case start to finish in the video below: Video Shows How to Drill and Tap Modified Case <iframe...
You can order the size M drill bit and the 5/16x36 TPI tap from Amazon or elsewhere, about $9 each. One purchase works for all your calibers.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.