• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

6.5x47 Lapua AI with 123 SMKs and AR Comp loads

Gents ---- here's the situation:

I'm just shaking out my BAT 3L switch barrel with a new HV Bartlein 1-8.5 30" chambered with a PTG 40 degree no-turn reamer. Copper fouling ended after six rounds. Total fired round count to date is 35. I've not fired any specific load for group yet, but trialing various five round sequences for pressure evaluation with charges increased by .2 gr. I came upon a 123 SMK with AR Comp sequence that printed .39 at 100 yds. Starting round was charged with 35.2 and fifth round at 36.0 gr. in front of CCI 450s with bullets seated to just touching the lands. Some minor bolt lift and barely noticeable cratering around the firing pin indent was detected on the fifth round only. No case head expansion was measured on any of the five rounds.

With that all said, and before sending a bunch more of this bullet/powder combination down the tube for group and chrono, has anyone out there any experience with AR Comp and 123 SMKs? Or, AR Comp with any other bullet combination in the 6.5x47 L?

Interested to hear your comments ----

Tooter
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,252
Messages
2,214,910
Members
79,496
Latest member
Bie
Back
Top