LA50SHOOTER
Sworn To Protect The Constitution.
Selling this rifle as I'm getting out of competition shooting.
If you've ever wanted to own a "Big 50" now is an opportunity to do so.
This rifle has top quality components used in the build and is in pristine condition.
The rifle has shot one FCSA match and was tested & load workups done prior too.
I'm offering the Rifle along with a total of 3 chambered barrels, of which 2 of the 3 are new/unfired.
- Also, I have included an extra trigger, bore-guide, action wrench, fire-formed primed (Not Loaded) Brass (98 pieces) and 100 pieces of NEW primed & neck-turned Lapua Match brass & 100 ea. 750 gr. Hybrid bore rider bullets. (ready to be fire-formed).
- This rife chamber has a 0.554 neck (So brass requires neck turning) and the chamber is throated for Bore-Rider type projectiles. - (0.510 driving band & 0.502 bore rider throat. - Allowing use of both Bore rider & Hybrid Bore Rider type bullets) - I am include a NEW finisher chambering reamer (PTG #17936) with Throating Reamer, and a NEW Resize Reamer for making dies. (Die blanks can be purchased at CH4D or Huntington's and proper heat treating can be done by http://www.fireballheattreating.com/index.html for your Full-Length Sizer die.)
Specifications / Details
L.O.P. = 14"
Barrels: (All are Chambered & Threaded) & Length: 36" (not counting length of brake).
- 1 ea. Lilja Stainless Steel Match grade button rifled 1-15" twist. - Has approx. 100 rounds on it.
- 1 ea. Bartlein Stainless Steel Match grade cut rifled 1-15" twist. - New & is ready to go.
- 1 ea. Bartlein Stainless Steel Match grade cut rifled 1-15.4 to 1-15.0" gain-twist. - New & is ready to go.
Chamber: 50 BMG Improved 30-degree shoulder. - The body has minimal taper and a 30-degree shoulder & a 0.554 neck with a Bore-Rider type throat.
The chamber was designed by Mr. Gordy Gritters & myself and it allows "standard 50 bmg" brass to be fire-formed in the chamber to achieve the improved case.
Approx. 11% increase in case capacity (by water volume) over the "standard 50 BMG" is achieved with this design. - Basically, it is a "trim one time" situation
as far as case growth goes. 2900 - 3000 fps can be easily & safely achieved with 800 gr. bullets (which is a 10-15% increase over the "standard design" 50 BMG)
Gunsmithing & Metal Work: By Gordy Gritters (One of the Best smith's out there !!)
Muzzle Brake: 3 port East-Ridge / State Arms Fish-Gill that locks to the barrel via allen-type set screw.
Stock: Manners Carbon Fiber model H50 (Made for heavy class 50 BMG type rifles & actions.
Action: Barnard Model GP single shot 2.00 diameter receiver, 12" length, Chrome-Moly Steel that has 3 locking lugs. No ejector plunger.
Scope Base: 30 MOA Rail which puts many competition style scopes in the center of adjustment range @ 1000 yds.
Weight: 44.54 pounds (as shown in photos) which leaves 5.46 pounds for scope & rings and will "make weight" for the 50.0-pound Heavy-Class weight limit in FCSA competition shooting.
Invested: Well over $10,000.00 (Not counting the brass & tooling that I'm including with the package)
I will provide "starting point" Reloading Data to the new owner if requested. (Basically, it is start with "standard 50" data & work up with care).
*** Shipping & Insurance will be split 50/50 between buyer and seller*** - CONUS sale only.
Asking Price for the Rifle: $7000.00
*** Please use the P.M. function for further discussion, questions, etc.***
Thank You, Ron (From Louisiana)
If you've ever wanted to own a "Big 50" now is an opportunity to do so.
This rifle has top quality components used in the build and is in pristine condition.
The rifle has shot one FCSA match and was tested & load workups done prior too.
I'm offering the Rifle along with a total of 3 chambered barrels, of which 2 of the 3 are new/unfired.
- Also, I have included an extra trigger, bore-guide, action wrench, fire-formed primed (Not Loaded) Brass (98 pieces) and 100 pieces of NEW primed & neck-turned Lapua Match brass & 100 ea. 750 gr. Hybrid bore rider bullets. (ready to be fire-formed).
- This rife chamber has a 0.554 neck (So brass requires neck turning) and the chamber is throated for Bore-Rider type projectiles. - (0.510 driving band & 0.502 bore rider throat. - Allowing use of both Bore rider & Hybrid Bore Rider type bullets) - I am include a NEW finisher chambering reamer (PTG #17936) with Throating Reamer, and a NEW Resize Reamer for making dies. (Die blanks can be purchased at CH4D or Huntington's and proper heat treating can be done by http://www.fireballheattreating.com/index.html for your Full-Length Sizer die.)
Specifications / Details
L.O.P. = 14"
Barrels: (All are Chambered & Threaded) & Length: 36" (not counting length of brake).
- 1 ea. Lilja Stainless Steel Match grade button rifled 1-15" twist. - Has approx. 100 rounds on it.
- 1 ea. Bartlein Stainless Steel Match grade cut rifled 1-15" twist. - New & is ready to go.
- 1 ea. Bartlein Stainless Steel Match grade cut rifled 1-15.4 to 1-15.0" gain-twist. - New & is ready to go.
Chamber: 50 BMG Improved 30-degree shoulder. - The body has minimal taper and a 30-degree shoulder & a 0.554 neck with a Bore-Rider type throat.
The chamber was designed by Mr. Gordy Gritters & myself and it allows "standard 50 bmg" brass to be fire-formed in the chamber to achieve the improved case.
Approx. 11% increase in case capacity (by water volume) over the "standard 50 BMG" is achieved with this design. - Basically, it is a "trim one time" situation
as far as case growth goes. 2900 - 3000 fps can be easily & safely achieved with 800 gr. bullets (which is a 10-15% increase over the "standard design" 50 BMG)
Gunsmithing & Metal Work: By Gordy Gritters (One of the Best smith's out there !!)
Muzzle Brake: 3 port East-Ridge / State Arms Fish-Gill that locks to the barrel via allen-type set screw.
Stock: Manners Carbon Fiber model H50 (Made for heavy class 50 BMG type rifles & actions.
Action: Barnard Model GP single shot 2.00 diameter receiver, 12" length, Chrome-Moly Steel that has 3 locking lugs. No ejector plunger.
Scope Base: 30 MOA Rail which puts many competition style scopes in the center of adjustment range @ 1000 yds.
Weight: 44.54 pounds (as shown in photos) which leaves 5.46 pounds for scope & rings and will "make weight" for the 50.0-pound Heavy-Class weight limit in FCSA competition shooting.
Invested: Well over $10,000.00 (Not counting the brass & tooling that I'm including with the package)
I will provide "starting point" Reloading Data to the new owner if requested. (Basically, it is start with "standard 50" data & work up with care).
*** Shipping & Insurance will be split 50/50 between buyer and seller*** - CONUS sale only.
Asking Price for the Rifle: $7000.00
*** Please use the P.M. function for further discussion, questions, etc.***
Thank You, Ron (From Louisiana)
Last edited:
